North East Lincolnshire · England
Bath re-enamelling & resurfacing in Keelby, North East Lincolnshire
Bath re-enamelling in and around Keelby: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
What happens on the day
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It normally takes most of the day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
Getting a price
If you are in Keelby and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Bath re-enamelling in Keelby without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We’re frequently asked to fix a dull, rough surface that won’t come clean and a roll-top that’s seen better days, in basins & shower trays, cast iron baths and pressed steel baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Keelby (DN41)
- Area hub
- North East Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Keelby
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we are asked about most:
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- Stains that will not shift
- Worn patches where water runs and sits
What to look for in a quote
- What preparation is included
- How the room is protected while they work
- When it can be used again
- Whether the price covers travel
Keelby and the surrounding area
Keelby is about 6 miles west of Grimsby, in North East Lincolnshire. Jobs in Keelby are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Keelby is one of 34 places in North East Lincolnshire where we work. Our nearest city page is Leeds, about 56 miles away.
Our visits in DN41 are booked in the same way as anywhere else. You’ll find streets such as Victoria Road, St Martin's Place and West Lane, all of which we cover. We also travel to Riby (2 miles south-east), Little London (2 miles north-east), Great Limber (2 miles south-west), Stallingborough (3 miles north-east) and Habrough (3 miles north). Larger places within reach include Grimsby (6 miles east), Cleethorpes (9 miles east), Immingham (3 miles north-east), Yarborough (6 miles east), New Clee (8 miles east) and Waltham (7 miles south-east).
Landmarks near Keelby
We visit homes around Keelby Primary Academy and Church of Saint Bartholomew and the streets around them. For rail, the closest station is Habrough station, about 2.5 miles north-west of the centre.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. The price reflects the work involved, not your postcode. You will see the full price before you book.
Why book with us
- No extra charge for your area
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
Take a look at our full price list and resurfacing vs replacement cost guide.
For landlords and businesses
For anyone letting property in or around Keelby, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Questions from Keelby
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Do you cover the entire of North East Lincolnshire?
We work UK-wide. Prices don’t change with location.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How easy the damage is to reach
- How many areas need work
- Unusual colours or finishes
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- A coin beside the damage so we can judge size
- One picture of the whole bath
- Details of any past repairs
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.
How to care for the repair
Simple care helps the repair last. Our advice:
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Nearby places to Keelby
More services for Keelby
About our accreditations · Every repair comes with a one-year guarantee.
