Lincolnshire · England
Bath re-enamelling & resurfacing in Kexby, Lincolnshire
Bath re-enamelling across Kexby and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
About our bath re-enamelling in Kexby
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and people most often call us about a bath that stays dull however much you clean it and a roll-top that’s seen better days.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Kexby (DN21)
- Region
- Lincolnshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Kexby
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What happens after I send pictures?
We review the pictures and send a fixed quote.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Nearby places to Kexby
What else we do in Kexby
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
When to call us in Kexby
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
People usually call us after spotting one of these:
- Stains that won’t shift
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Before you book anyone
- A fixed quote, and whether VAT is included
- Who turns up on the day
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
Repair or replace in Kexby?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
Read our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Kexby
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Kexby, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Let us know if it has been repaired before
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How much damage there is
- What the surface is made of
- Unusual colours or finishes
- What kind of damage it is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Kexby, and we will reply with a fixed quote.
Kexby and nearby
Kexby is about 4 miles south-east of Gainsborough, in Lincolnshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Kexby is one of 732 places in Lincolnshire we cover. Our jobs stretch from Kexby to Leeds (about 47 miles away).
Postcode districts we cover here: DN21. Streets in the area include High Street, Upton Road and Westgate, and we cover them all. Neighbouring places we cover include Upton (1 mile north), Willingham by Stow (1 mile south), Heapham (2 miles north), Normanby by Stow (2 miles south) and Springthorpe (2 miles north). Larger places within reach include Lincoln (11 miles south-east), Gainsborough (4 miles north-west), North Hykeham (13 miles south), Birchwood (11 miles south), Hykeham (13 miles south) and Ermine (10 miles south-east).
Around Kexby
In Kexby, that means homes near Half Moon Inn and Church of All Saints. For rail, the closest station is Gainsborough Lea Road station, roughly 3.5 miles north-west. Nearby you’ll also find John Coupland Hospital (5.1 miles north-west).
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Kexby
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
