Devon · England
Bath re-enamelling & resurfacing in Kingscott, Devon
We travel to Kingscott for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
About our bath re-enamelling in Kingscott
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Our technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people contact us are worn patches where water runs and sits and lots of chips and rust spots.
All our work is covered by a one-year guarantee, wherever you are in Devon.
- Location
- Kingscott (EX38)
- Area hub
- Devon
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Prices start from £350. The price reflects the work involved, not where you live. You will see the full price before booking.
Why us?
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Kingscott. The price reflects:
- Whether old repairs or coatings need taking off
- The material
- Where the damage is and how we get to it
- The size and number of damaged areas
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- Any details about the material
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Something in shot to show the size
Send us pictures of the damage and a wider shot of the whole item, with your EX38 postcode, and we’ll reply with a fixed quote.
Common problems we fix in Kingscott
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting one of these:
- Enamel that’s lost its shine and feels rough
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- An outdated colour you’d like to change
What to look for in a quote
- Whether cleaning and preparation are in the price
- How to care for the finish
- Whether there are any call-out or travel charges
- How your room will be protected
Also near Kingscott
More services for Kingscott
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Where we work around Kingscott
Kingscott is about 7 miles south-east of Bideford, in Devon. From the centre of Kingscott to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Kingscott is one of 586 places in Devon we cover.
Jobs in EX38 are booked in the same way as anywhere else. Nearby, we also work in Beaford (2 miles south-east), Great Torrington (2 miles west), Roborough (3 miles east), Little Torrington (3 miles west) and Taddiport (3 miles west). Within a short drive, we also cover Barnstaple (9 miles north), Bideford (7 miles north-west), Okehampton (15 miles south), Braunton (12 miles north), Newport (9 miles north) and South Molton (12 miles north-east).
Near you in Kingscott
Our clients here include homes close to Parish church of St Giles and Great Torrington School and the streets around them. A little further out are Barometer World (3.6 miles south).
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Kingscott questions
Do you work in Kingscott?
Yes. We work across the UK and travel to Kingscott. Send us photos for a fixed quote, or call 0345 017 0787.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What areas do you cover?
Everywhere in the UK, Kingscott included. Travel is included in the price.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
