East Dunbartonshire · Scotland
Bath Re-enamelling in Lenzie
Fixed-price bath re-enamelling in Lenzie and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that will not come clean
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- How hard the colour is to match
- Access to the area
- The material and finish
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Lenzie. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Most quotes are done from pictures alone. To make it quick:
- A clear, close picture of the problem area
- Natural light rather than flash
- Any details about the material
- Details of any past repairs
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Lenzie, and we’ll come back with a fixed quote.
Bath re-enamelling in Lenzie without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a bath that stays dull however much you clean it and a coating lifting around the plughole, we can generally put it right, on cast iron baths, acrylic baths and basins & shower trays alike.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Where
- Lenzie (G66)
- Area hub
- East Dunbartonshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
To keep it looking its best:
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repairing versus replacing in Lenzie
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- Every repair guaranteed for a year
- Colour-matched on site
- Generally one visit, start to finish
- Everything repaired in place
Take a look at our pricing and bath cost comparison.
Nearby places to Lenzie
Also in Lenzie
How it works
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day, including clearing up.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
- Open a window if you can
Get a quote
For a price in Lenzie, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Lenzie
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Questions from Lenzie
Do you come to Lenzie?
Yes, we do. We send a technician to Lenzie for every job, with no extra charge for travel.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
How long is the bath unusable?
One day for most baths, ready the next day. We give you timings with the quote.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Lenzie and the surrounding area
Lenzie is about 6 miles west of Cumbernauld, in East Dunbartonshire. Wherever you are in the G66 postcode area, we carry out the work at your property. Lenzie is one of 23 places in East Dunbartonshire where we work. Our nearest city page is Glasgow, about 7 miles away.
Here we cover the G66 postcode area. You will find streets such as Moss Road, Cult Road and Loch Road, all of which we cover. You’ll find Lenzie on the A806, which makes it straightforward to reach. We also travel to Kirkintilloch (1 mile north), Woodilee Village (1 mile north-east), Auchinloch (1 mile south), Waterside (1 mile north-east) and Birdston (2 miles north). Larger places within reach include Bearsden (7 miles west), Bishopbriggs (3 miles south-west), Milngavie (7 miles west), Lennoxtown (4 miles north-west), Milton of Campsie (3 miles north) and Cadder (3 miles west).
Around Lenzie
Around Lenzie, we work in homes near Lenzie Old Parish Church and Kirkintilloch High School and the streets around them. There is a railway station in Lenzie itself: Lenzie station. Nearby you’ll also find Glasgow Fort (3.6 miles south) and Barony Chambers Museum (1.3 miles north). Not far away are Bar Hill and Lenzie Moss.
About our accreditations · Every repair comes with a one-year guarantee.
