Newcastle upon Tyne · England

Bath re-enamelling & resurfacing in Lobley Hill, Newcastle upon Tyne

We travel to Lobley Hill for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Lobley Hill

How we handle bath re-enamelling in Lobley Hill

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We’re often asked to fix thin, worn enamel in places and brown or grey marks that don’t clean off, across Victorian roll-tops, acrylic baths and pressed steel baths.

Your repair is guaranteed for a year, as with every job we do.

Area
Lobley Hill (NE11, NE8)
Region
Newcastle upon Tyne
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Signs you need bath re-enamelling in Lobley Hill

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Most people get in touch when they notice one of these:

  • Worn patches where water runs and sits
  • Enamel that’s lost its shine and feels rough
  • Chips and rust in more than one place
  • A coloured bath you want in white

What to look for in a quote

  • How long the guarantee is and what it covers
  • Whether cleaning and preparation are in the price
  • What happens if they find more damage
  • Whether the colour is mixed to match

10 questions to ask before you book

What bath re-enamelling costs

Prices start from £350. You will know the full cost before you book. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Quotes from your pictures

Before you send pictures, these tips help us give you a firm price:

  • One sharp close-up of the damage
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • Any details about the material

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

For landlords and businesses

If you manage property in Lobley Hill, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams in Newcastle upon Tyne and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Your questions about bath re-enamelling in Lobley Hill

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Will the bath be moved?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

How long does re-enamelling take?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Repairing versus replacing in Lobley Hill

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • Work done at your home or business
  • One-year guarantee on every repair
  • No need to remove anything
  • We leave the room as we found it

See our prices page or resurfacing vs replacement cost guide.

How to care for the repair

Aftercare is simple:

  • Fix dripping taps quickly
  • Don’t use the bath until it has fully cured
  • Do not let dyes or oils sit on the finish
  • Use washing-up liquid and a soft cloth

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Our work in Lobley Hill

Lobley Hill is about 1 mile south of Dunston, in Newcastle upon Tyne. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 63 places across Newcastle upon Tyne.

Postcode districts we cover here: NE11 and NE8. Jobs here include addresses on New Road, Coach Road and Consett Road. Lobley Hill is on the A1 and A692, so it’s easy for us to reach. If you are just outside Lobley Hill, we cover Low Team (1 mile north), Dunston (1 mile north), Team Valley (1 mile south-east), Bensham (1 mile north-east) and Chowdene (2 miles south-east). Further out, we also cover Newcastle upon Tyne (3 miles north), Denton (4 miles north-west), Slatyford (4 miles north-west), West Denton (5 miles north-west), East Denton (4 miles north-west) and Gosforth (5 miles north).

Around Lobley Hill

Our customers here include homes close to All Saints Church, Emmanuel College and Saltwell Park. The closest station to Lobley Hill is Dunston station, roughly 0.7 miles north of the centre. Well-known places in the area include Dunston Hill Hospital (0.9 miles north-west) and Newcastle upon Tyne Castle (2.3 miles north-east). For a walk, there’s Addison and Hedgefield Woods.

  • Parks and local facilities nearby include County Borough of Gateshead (2 miles north-east)
Map of Lobley Hill © OpenStreetMap contributors

What we do, step by step

Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s usually ready the next day.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

How to get a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Get a free quote

Related advice

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.