Bristol · England
Bath Re-enamelling for Lockleaze homes
Full bath re-enamelling and resurfacing for homes and businesses in Lockleaze and across Bristol. Send photos for a free, fixed quote.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
What affects the price in Lockleaze
Resurfacing from £350. We charge the same across the UK, including Lockleaze. The price reflects:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Any details about the material
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Bath re-enamelling in Lockleaze, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, on cast iron baths, pressed steel baths and acrylic baths.
You get a one-year guarantee, the same in Lockleaze as everywhere else we work.
- Location
- Lockleaze (BS7, BS16)
- Region
- Bristol
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Other services in Lockleaze
For landlords and businesses
Landlords, letting agents and housing providers in Lockleaze use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
It’s all simple stuff:
- Have chips seen to early
- Do not use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs straight away
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Lockleaze: your questions answered
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Which areas do you work in?
Across the UK, so Lockleaze is covered. Prices don’t change with location.
How much does bath re-enamelling cost in Lockleaze?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Lockleaze and the surrounding area
Lockleaze is about 1 mile north-west of Fishponds, in Bristol. Our technicians come to homes and businesses in Lockleaze and nearby villages, so you do not need to take anything anywhere. We work in 89 places across Bristol. We work right across the region, from Lockleaze to Birmingham (about 73 miles away).
We work across the BS7 and BS16 postcode area and the streets around it. Jobs here include addresses on Park Road, Blake Road and Crome Road. Close by, we cover Stapleton (1 mile south), Cheswick (1 mile north), Horfield (1 mile west), Broomhill (1 mile east) and Eastville (1 mile south). We also work in nearby towns such as Bristol (3 miles south-west), Bedminster (4 miles south-west), Canon's Marsh (3 miles south-west), Southville (4 miles south-west), Windmill Hill (4 miles south) and The Chessels (4 miles south-west).
Around Lockleaze
Around Lockleaze, we work in homes near Stoke Park Primary School, Trinity Academy and South Gloucestershire Hospital Home Teaching Service and the streets around them. You’ll also find Saint Mary Magdalen and Saint Francis Lockleaze (within half a mile west), The Gainsborough pub (within half a mile north-west) and Stoke Park (within half a mile east). Lockleaze’s nearest station is Filton Abbey Wood station, about 0.9 miles north. A little further out are Cabot Circus (2.4 miles south-west) and Barton Regis Rural District (1.3 miles south). Green spaces nearby include Purdown and Tarn Lake.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Open a window if you can
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Lockleaze. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Lockleaze customers choose us
- Everything repaired in place
- CHAS and Constructionline accredited
- A fixed quote before you book
- Colour-matched on site
See our pricing or guide to resurfacing and replacement costs.
When to call us in Lockleaze
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
These are the problems we are asked about most:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
Before you book anyone
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- Whether a trained technician does the job
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
