Leeds · England

Bath re-enamelling & resurfacing in Lofthouse, Leeds

Full bath re-enamelling and resurfacing for homes and businesses in Lofthouse and across Leeds. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Stains that will not shift
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Lofthouse

Keeping it looking good

Once the work has cured, treat it gently:

  • A dripping tap should be fixed promptly
  • Rinse off hair dye, oils and bath bombs immediately
  • Use washing-up liquid and a soft cloth
  • Respect the curing time we give you

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Bath re-enamelling in Lofthouse, done in place

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on cast iron baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are stains that won’t shift and chips and rust in more than one place.

Your repair is guaranteed for a year, as with every job we do.

Before and after: an old basin refinished to bright white
Where
Lofthouse (WF3)
County
Leeds
Cover
A year, on every repair
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

How it works

We work cleanly and quietly. Protection goes down first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive
  • Open a window if you can

Getting a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Send photos for a quote

Advice

Signs you need bath re-enamelling in Lofthouse

Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.

Typical reasons for a call-out include:

  • A bath in a colour that no longer suits
  • Stains that won’t shift
  • Lots of chips and rust spots
  • A dull, rough surface that won’t come clean

What your quote should include

  • Whether the price covers travel
  • What happens if they find more damage
  • Who will actually do the work
  • What the guarantee covers, and for how long

How to compare quotes

Repairing versus replacing in Lofthouse

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Lofthouse. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • One visit for most repairs
  • A year’s guarantee on all work
  • Same prices wherever you are

Take a look at our full price list and guide to resurfacing and replacement costs.

Covering Lofthouse

Lofthouse is about 2 miles south-west of Rothwell, in Leeds. Across the WF3 area, we come to you. Our repair technicians cover 198 places across Leeds, from the larger towns to small villages. Our jobs stretch from Lofthouse to Leeds (about 6 miles away).

We work across the WF3 postcode area. Streets in the area include Leeds Road, Back Lane and Temple View. Close by, we cover Carlton (1 mile north-east), Lofthouse Gate (1 mile south), Royds Green (1 mile east), Stanley (1 mile south-east) and Bottom Boat (2 miles south-east). Further out, we also cover Leeds (6 miles north), Morley (4 miles west), Pudsey (9 miles north-west), Beeston (4 miles north-west), Farsley (9 miles north-west) and Horsforth (9 miles north-west).

What’s near Lofthouse

We visit homes around Springhead Park, Christ Church and The Rodillian Academy. Nearby too are Rose and Crown pub (under half a mile south-east) and Robin Hood Primary School (0.6 miles north-west). For rail, the closest station is Outwood station, about 1.2 miles south-west. Well-known places in the area include Rothwell Castle (1.5 miles north-east) and Mental Health Museum (2.2 miles south). Not far away are Jaw Hill and Lemonroyd Lake.

Map of Lofthouse © OpenStreetMap contributors

Common questions in Lofthouse

Do you come to Lofthouse?

Yes. We cover the entire UK and travel to Lofthouse. Send us photos for a fixed quote, or call 0345 017 0787.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Leaking taps or wastes (a plumber’s job)
  • A poorly supported acrylic bath, until it’s firmed up
  • A bath split right through the body

Send us pictures and we’ll tell you honestly.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths

Landlords, agents and businesses in Lofthouse

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.