Shropshire · England
Bath Re-enamelling for Loggerheads homes
Local bath re-enamelling for Loggerheads: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
Bath re-enamelling in Loggerheads without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about a bath in a colour that no longer suits and a coating lifting around the plughole.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Loggerheads (TF9)
- County
- Shropshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Loggerheads and nearby
Loggerheads is about 5 miles east of Market Drayton, in Shropshire. Clients in Loggerheads get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover 433 places across Shropshire. We work right across the region, from Loggerheads to Birmingham (about 37 miles away).
All of TF9 is within our area. Local streets include Springfield, Chestnut Road and Beech Grove, all of which we cover. We also travel to Tadgedale (1 mile west), Ashley Dale (1 mile east), Ashley (1 mile east), Pipe Gate (3 miles north) and Dorrington (3 miles north). Larger places within reach include Market Drayton (5 miles west), Whitchurch (13 miles west), Wem (15 miles west), Shawbury (15 miles south-west), Prees Higher Heath (11 miles west) and Hinstock (7 miles south-west).
Around Loggerheads
Around Loggerheads, we work in homes near Hugo Meynell CofE (VC) Primary School and the streets around them. Nearby you will also find Castle Hill (1.7 miles north-east). Green spaces nearby include Jackon's Coppice and Marsh.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Loggerheads clients choose us
- A year’s guarantee on all work
- No extra charge for your area
- Work done at your home or business
- CHAS and Constructionline accredited
Read our prices page and resurfacing vs replacement cost guide.
Common questions in Loggerheads
What happens next?
We review the photos and send a fixed quote.
Do you work in Loggerheads?
Yes, we do. Technicians travel to Loggerheads from across the region, and the price is the same as everywhere else.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Landlords, agents and businesses in Loggerheads
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Do you need bath re-enamelling in Loggerheads?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
What your quote should include
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- Doing more than one item at once
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- Something in shot to show the size
- Your postcode, so we can check dates
- A picture taken from further back
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What we can’t put right
It helps to know what we cannot do:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Towns and villages near Loggerheads
More services for Loggerheads
About our accreditations · Every repair comes with a one-year guarantee.
