Leeds · England

Bath Re-enamelling for Mabgate homes

Local bath re-enamelling for Mabgate: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Mabgate

How we handle bath re-enamelling in Mabgate

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include enamel that’s lost its shine and feels rough and an old resurfacing that’s failing, on cast iron baths, pressed steel baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Area
Mabgate (LS2, LS9, LS1)
County
Leeds
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

When a repair is not the answer

Before booking, it’s worth knowing the limits:

  • An acrylic bath that flexes badly underfoot
  • A metal bath with a through crack
  • Plumbing leaks, which need a plumber

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Repairing versus replacing in Mabgate

A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • Typically one visit, start to finish
  • One-year guarantee on every repair
  • No need to remove anything
  • Repair technicians who travel to you, UK-wide

Take a look at our pricing or resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Prices and what affects them

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • Doing more than one item at once
  • How much damage there is
  • How hard the colour is to match
  • The material and finish

Our prices are the same across the UK, so there’s no premium for Mabgate. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

You can take the pictures on your phone, there’s no need for anything special. Make sure they show:

  • One sharp close-up of the damage
  • A picture taken from further back
  • Where you are, by postcode
  • Details of any past repairs

Most clients in Mabgate get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

When to call us in Mabgate

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

These are the problems we are asked about most:

  • A dull, rough surface that will not come clean
  • Thin, worn enamel in places
  • Several chips and rust patches
  • A coating lifting around the plughole

Before booking anyone

  • How soon you can use it again
  • Whether the price covers travel
  • Who turns up on the day
  • What aftercare is recommended

Choosing a repair company

How it works

We begin by going over the job with you. Then the area is sheeted and masked and the work begins. It normally takes the best part of a day, and we’ll keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Getting ready for the visit

  • Let us know about parking or access
  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

Questions from Mabgate

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

How long does re-enamelling take?

Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

What information do you need?

Use the quote form or ring 0345 017 0787.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Leeds.

Mabgate and nearby

Mabgate is about 1 mile south-east of Leeds, in Leeds. Whether you’re in the middle of Mabgate or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 198 towns and villages across Leeds.

Here we cover the LS2, LS9 and LS1 postcode area. We regularly work on streets such as Lady Lane, Hope Road and Vicar Lane and the roads around them. With the A64(M) close by, Mabgate is easy for our technicians to reach. We also cover the places around Mabgate: Leylands (1 mile west), Lincoln Green (1 mile north-east), Buslingthorpe (1 mile north), Leeds (1 mile north-west) and Potternewton (1 mile north). We also work in nearby towns such as Morley (5 miles south-west), Pudsey (6 miles west), Rothwell (4 miles south-east), Farsley (6 miles west), Horsforth (5 miles north-west) and Wetherby (11 miles north-east).

Local landmarks in Mabgate

Locally, our jobs take us to homes close to St Peter's Church of England Primary School, The Black Horse pub and Penny Pocket Park, among other places. Other local landmarks include St Mary's Church (less than half a mile south), University of Leeds Libraries (1 mile north-west) and The Co-operative Academy of Leeds (less than half a mile east). The nearest railway station is Leeds station, roughly 0.9 miles south-west of the centre. A little further out are St James's University Hospital (0.7 miles north-east) and Rothwell Castle (4.1 miles south-east). Open spaces near Mabgate include Rodley Nature Reserve and Post Hill.

Map of Mabgate © OpenStreetMap contributors

Aftercare tips

After the repair has cured, a few habits help it last:

  • Fix dripping taps quickly
  • Clean with a soft cloth and mild detergent
  • Wash away dyes and oils after use
  • Store bottles off the bath

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.