Hampshire · England
Bath Re-enamelling in Marchwood
Our repair technicians come to Marchwood for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
How we handle bath re-enamelling in Marchwood
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include an original cast iron bath that needs restoring and worn patches where water runs and sits, in pressed steel baths, acrylic baths and Victorian roll-tops.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Marchwood (SO40)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Marchwood
Landlords, letting agents and housing providers in Marchwood use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
If you manage property in Marchwood, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Our work in Marchwood
Marchwood is about 3 miles south-east of Totton, in Hampshire. Jobs in Marchwood are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Marchwood is one of 683 towns and villages in Hampshire where we work. You can also see our page for London, about 72 miles away.
Postcode districts we cover here: SO40. Streets in the area include Cranberry Close, Melick Close and The Rowans, all of which we cover. Being close to the A326, Marchwood is easy for our repair technicians to reach. We also cover the places around Marchwood: Dibden (2 miles south-east), Dibden Purlieu (3 miles south-east), Hythe (3 miles south-east), Beaulieu (5 miles south) and Furzey Lodge (5 miles south). We also work in nearby towns such as Winchester (13 miles north-east), Gosport (14 miles south-east), Eastleigh (7 miles north-east), Fareham (11 miles east), Totton (3 miles north-west) and Chandler's Ford (7 miles north-east).
Landmarks near Marchwood
Typical jobs here are in homes near Hounsdown School, White Horse pub and Church of St John the Apostle, among other places. For rail, the closest station is Millbrook (Hants) station, roughly 1.6 miles north-east of the centre. Further afield, we also cover the area around Netley Castle (4.1 miles east) and Westquay (2.1 miles east). Open spaces near Marchwood include Testwood Lakes.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Marchwood. The price comes down to:
- How much damage there is
- Whether we combine several jobs
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Quotes from your pictures
Two or three clear pictures are usually enough. It helps if you send:
- One picture of the whole bath
- A close-up of the damage, in focus
- Something in shot to show the size
- Details of any past repairs
Most customers in Marchwood get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Signs you need bath re-enamelling in Marchwood
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Marchwood contact us are:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Before booking anyone
- How soon you can use it again
- Whether they match the colour on site
- Who will actually do the work
- What aftercare is recommended
Places near Marchwood
Other services in Marchwood
How to care for the repair
To keep it looking its best:
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Marchwood. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Work done at your home or business
- One visit for most repairs
See our pricing or guide to resurfacing and replacement costs.
When we would advise against a repair
We will not take on work that will not last, so these are the limits:
- A metal bath with a through crack
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
- Let the surface dry out before the visit
Getting a price
Send us a picture of the damage and a wider shot of the entire item, with your SO40 postcode, and we’ll come back with a fixed quote.
Related advice
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Your questions about bath re-enamelling in Marchwood
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How long will the bath be out of use?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Do you work in Marchwood?
Yes. We cover the entire UK and travel to Marchwood. Send us pictures for a fixed quote, or call 0345 017 0787.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
