East Sussex · England
Bath re-enamelling & resurfacing in Marden's Hill, East Sussex
Fixed-price bath re-enamelling in Marden's Hill and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Wear marks under the taps
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Marden's Hill, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people get in touch are a coloured bath you want in white and a period or roll-top bath worth keeping.
Every repair is covered by a one-year guarantee.
- Where
- Marden's Hill (TN6)
- Area hub
- East Sussex
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Marden's Hill
Marden's Hill is about 2 miles north-west of Crowborough, in East Sussex. Across the TN6 area, we carry out the work at your property. Marden's Hill is one of 289 towns and villages in East Sussex we cover. We work right across the region, from Marden's Hill to London (31 miles away).
Postcode districts we cover here: TN6. You’ll find streets such as Friars Vale, St John's Road and Marden's Hill. We also cover the places around Marden's Hill: Friar's Gate (1 mile north-west), Chuck Hatch (2 miles west), Crowborough (2 miles south-east), Steel Cross (2 miles east) and Boarshead (2 miles east). Further out, we also cover Lewes (15 miles south-west), Hailsham (15 miles south), Uckfield (7 miles south), South Malling (14 miles south-west), Heathfield (9 miles south-east) and Southover (15 miles south).
What’s near Marden's Hill
Typical jobs here are in homes near The Half Moon Inn, St John's Church and St John's Church of England Primary School, among other places. For rail, the closest station is Crowborough station, about 2.7 miles south-east of the centre. Well-known places in the area include Bolebroke Castle (3.7 miles north-west) and Crowborough War Memorial Hospital (1.5 miles south-east). Green spaces nearby include Crowborough Country Park.
Common problems we fix in Marden's Hill
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Look out for these signs:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- How the room is protected while they work
Places near Marden's Hill
More services for Marden's Hill
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Get a quote
Upload a picture of the damage and a wider shot of the whole item, with your TN6 postcode, and we’ll reply with a fixed quote.
Read more
FAQs for Marden's Hill
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover the whole of East Sussex?
Everywhere in the UK, Marden's Hill included. There is no extra charge for travel.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We come to you, anywhere in the UK
Take a look at our prices page or guide to resurfacing and replacement costs.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs right away
- Dry the bath after use to stop limescale
- Respect the curing time we give you
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
