Bracknell Forest · England
Bath re-enamelling & resurfacing in Martins Heron, Bracknell Forest
Full bath re-enamelling and resurfacing at your home in Martins Heron, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we handle bath re-enamelling in Martins Heron
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We work on acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Martins Heron (RG12, SL5)
- Region
- Bracknell Forest
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Also near Martins Heron
More services for Martins Heron
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Martins Heron
- Honest advice, even when it means no job
- One price list for the whole UK
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Take a look at our pricing and resurfacing vs replacement cost guide.
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Covering Martins Heron
Martins Heron is about 1 mile east of Bracknell, in Bracknell Forest. Wherever you are in the RG12 postcode area, we carry out the work at your property. Martins Heron is one of 41 towns and villages in Bracknell Forest where we work. Our jobs stretch from Martins Heron to London (about 28 miles away).
Jobs in RG12 and SL5 are booked in the same way as anywhere else. From Bog Lane, Radnor Road and London Road or anywhere nearby, a technician can come to you. Nearby, we also work in The Warren (1 mile south), Jennett's Park (1 mile west), Forest Park (1 mile south), Bullbrook (1 mile north-west) and Harmans Water (1 mile south-west). Within a short drive, we also cover Sandhurst (5 miles south-west), Binfield (3 miles north-west), Popeswood (3 miles west), College Town (5 miles south-west), Farley Wood (3 miles west) and Amen Corner (3 miles west).
Near you in Martins Heron
Typical jobs here are in homes near LVS Ascot, Harmans Water Primary School and St Paul, among other places. There is a railway station in Martins Heron itself: Martins Heron station. Well-known places in the area include Heatherwood Hospital (1.5 miles east) and The Lexicon (1.3 miles north-west). Green spaces nearby include Heath Lake and Wildmoor Heath.
Martins Heron questions
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you quote from pictures?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How long is the bath unusable?
One day for most baths, ready the following day. We will confirm timings when we quote.
Aftercare tips
It’s all simple stuff:
- Store bottles off the bath
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
When to call us in Martins Heron
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
Before you book anyone
- How the colour is matched
- How soon you can use it again
- How the room is protected while they work
- Whether the price is fixed and includes VAT
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Get a quote
If you are in Martins Heron and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
