Kirklees · England
Bath Re-enamelling in Mirfield
Full bath re-enamelling and resurfacing in Mirfield, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Bath re-enamelling in Mirfield without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and people most often call us about an original cast iron bath that needs restoring and wear marks under the taps.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Mirfield (WF14)
- Region
- Kirklees
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Signs you need bath re-enamelling in Mirfield
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted:
- A roll-top that is seen better days
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
What your quote should include
- What happens if the damage is worse than the pictures show
- How to care for the finish
- Who turns up on the day
- How the room is protected while they work
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- A wider photo showing the whole bath
- A clear, close picture of the problem area
- Details of any past repairs
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Mirfield
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Mirfield questions
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work in Mirfield?
We do. We send a technician to Mirfield for every job, and the price is the same as everywhere else.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Covering Mirfield
Mirfield is about 3 miles west of Dewsbury, in Kirklees. We travel to homes and businesses in Mirfield and the surrounding area, so there is no workshop to go to. Our repair technicians cover 189 places in Kirklees, from the larger towns to small villages. We work right across the region, from Mirfield to Leeds (about 11 miles away).
Every address in WF14 is covered, from the main roads to the quietest streets. We regularly work on streets such as Station Road, Back Station Road and West Royd Park and the roads around them. Mirfield sits on or near the A644, which makes travel easy. Other places close to Mirfield include Lower Hopton (1 mile south), Ravensthorpe (1 mile east), Sands (1 mile south-east), Dewsbury Moor (2 miles north-east) and Whitley Lower (2 miles south-east). Further out, we also cover Huddersfield (5 miles south-west), Dewsbury (3 miles east), Batley (3 miles north-east), Cleckheaton (3 miles north), Meltham (9 miles south-west) and Staincliffe (3 miles north-east). Mirfield is among the bigger towns we cover in Kirklees.
Around Mirfield
In Mirfield, that means homes near Saville Arms, Church of St Paul and Castle Hall Academy and the streets around them. For rail, the closest station is Mirfield station, about 0.7 miles south of the centre. Well-known places in the area include Dewsbury and District Hospital (2.4 miles north-east) and Dewsbury Bus Museum (1.3 miles east).
Repair or replace in Mirfield?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- One visit for most repairs
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- Nothing taken out or refitted
Take a look at our pricing or resurfacing vs replacement cost guide.
Nearby places to Mirfield
More services for Mirfield
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
