Shetland Islands · Scotland

Bath Re-enamelling for Mossbank homes

Full bath re-enamelling and resurfacing at your home in Mossbank, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Stains that won’t shift
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Mossbank

Bath re-enamelling at your home in Mossbank

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on pressed steel baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about stains that won’t shift and enamel that’s lost its shine and feels rough.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Location
Mossbank (ZE2)
County
Shetland Islands
Cover
One year on every repair
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

How the visit works

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s normally ready the following day.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Keep children and pets away from the room on the day
  • Let us know which floor the room is on

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Send photos for a quote

Related advice

Do you need bath re-enamelling in Mossbank?

Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.

Typical reasons for a call-out include:

  • An outdated colour you’d like to change
  • Enamel that is lost its shine and feels rough
  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring

What to look for in a quote

  • Who turns up on the day
  • Whether they match the colour on site
  • What the guarantee covers, and for how long
  • What prep work is covered

Our hiring checklist

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

Our work in Mossbank

Mossbank is in the Shetland Islands. Wherever you are in the ZE2 postcode area, a technician comes to you. We work in all 63 towns and villages across the Shetland Islands.

We work across the ZE2 postcode area and the streets around it. Whether you live on Smuggabank, Rayburn Road and Burraness or a nearby road, a technician can come to you. Neighbouring places we cover include Firth (1 mile south-west), Scatsta (4 miles south-west), Burravoe (5 miles north-east), Ollaberry (6 miles north-west) and Vidlin (6 miles south). Some remote addresses need extra planning, so it’s best to call first.

What’s near Mossbank

Around Mossbank, we work in homes near Mossbank. The countryside around Mossbank includes Neshion Water.

Map of Mossbank © OpenStreetMap contributors

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Prices and what affects them

Resurfacing from £350. We charge the same across the UK, including Mossbank. The price reflects:

  • How many items we do on one visit
  • How much damage there is
  • Access to the area
  • How hard the colour is to match

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • The postcode, so we can plan the visit
  • One picture of the whole bath
  • One sharp close-up of the damage
  • The material, if you know it

If you’re in Mossbank and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

When a repair is not the answer

We’d rather lose a job than do one that will not last, so these are the limits:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • A cast iron or steel bath that’s cracked right through

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops

Landlord and trade work in Mossbank

Landlords, letting agents and housing providers in Mossbank use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Mossbank questions

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can a failed resurfacing be redone?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

How much does bath re-enamelling cost in Mossbank?

Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Repair or replace in Mossbank?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Mossbank. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Mossbank

  • One-year guarantee on every repair
  • Fixed prices from your pictures
  • One visit for most repairs
  • We leave the room as we found it

See our pricing or bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.