Northamptonshire · England
Bath re-enamelling & resurfacing in Moulton, Northamptonshire
Full bath re-enamelling and resurfacing for homes and businesses in Moulton and across Northamptonshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
How we handle bath re-enamelling in Moulton
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can help, on Victorian roll-tops, acrylic baths and pressed steel baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Moulton (NN3, NN6)
- Area hub
- Northamptonshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Moulton
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do the materials smell?
There may be a mild smell during the work.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How long will the bath be out of use?
One day for most baths, ready the following day. We will confirm timings when we quote.
Covering Moulton
Moulton is about 3 miles north-east of Northampton, in Northamptonshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Moulton is one of 364 towns and villages in Northamptonshire where we work. You can also see our page for Birmingham, about 46 miles away.
Here we cover the NN3 and NN6 postcode area. From High Street, Eady Close and Wantage Close or a nearby road, we can come to you. Main roads around Moulton include the A43, which makes travel easy. Close by, we cover Round Spinney (1 mile south), Overstone (1 mile east), Boothville (2 miles south), Sywell (2 miles east) and Boughton (2 miles west). Further out, we also cover Northampton (3 miles south-west), Corby (15 miles north-east), Kettering (9 miles north-east), Wellingborough (6 miles east), Daventry (14 miles west) and Rushden (10 miles east).
What’s near Moulton
Typical jobs here are in homes near Overstone Park School, The Artichoke Public House and Moulton Primary School and the streets around them. Nearby too are Moulton School and Science College (0.6 miles west), Church of St Peter and St Paul (less than half a mile west) and Crowfields Common (less than half a mile south-west). Moulton’s nearest station is Northampton station, about 4.5 miles south-west. Other landmarks nearby include Boothville (1.5 miles south) and Earls Barton Museum of Local Life (1.7 miles east). Green spaces nearby include Lings Wood Nature Reserve.
Common problems we fix in Moulton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- A coloured bath you want in white
Before you book anyone
- What the guarantee covers, and for how long
- What prep work is covered
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- No need to remove anything
- Work done at your home or business
Read our prices page and bath cost comparison.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- What the surface is made of
- What kind of damage it is
- How much damage there is
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Any details about the material
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Towns and villages near Moulton
Also in Moulton
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Steel that has corroded right through
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
