Aberdeen · Scotland

Bath Re-enamelling in New Aberdeen

Bath re-enamelling for New Aberdeen, without a refit. Get a fixed quote from your photos, then book a visit.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near New Aberdeen

Bath re-enamelling in New Aberdeen, done in place

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are a dull, rough surface that won’t come clean and an outdated colour you’d like to change.

All our work comes with a one-year guarantee.

Before and after: an old basin refinished to bright white
Location
New Aberdeen (AB11, AB24, AB25)
Region
Aberdeen
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs in Aberdeen and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

How to look after the repair

So the finish stays in good condition for years:

  • A quick wipe after use keeps limescale away
  • Stick to gentle, non-abrasive cleaners
  • Keep toiletries on a shelf rather than in the bath
  • Leave the bath for the full curing time before using it

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Questions from New Aberdeen

What do you need from me?

Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.

Can a failed resurfacing be redone?

Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.

Is repairing better than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Will the bath be moved?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Covering New Aberdeen

New Aberdeen is about 1 mile east of Aberdeen, in Aberdeen. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. New Aberdeen is one of 63 places in Aberdeen where we work.

Postcode districts we cover here: AB11, AB24 and AB25. Jobs here include addresses on Shoe Lane, Shore Lane and Water Lane and the roads around them. Main roads around New Aberdeen include the A956, so getting to you is simple. If you’re just outside New Aberdeen, we cover Footdee (1 mile east), Torry (1 mile south-east), Balnagask (1 mile south-east), Tullos (2 miles south) and Altens (2 miles south). Larger places within reach include Dyce (5 miles north-west), Portlethen (6 miles south), Cults (4 miles south-west), Craigiebuckler (3 miles west), Danestone (3 miles north-west) and Mastrick (3 miles west). New Aberdeen is one of the larger places we cover in Aberdeen.

What’s near New Aberdeen

Our clients here include homes close to The Archibald Simpson pub, St Peter's RC Church and Presbytery and Gilcomstoun Primary School. Also close by are North East of Scotland Music School (0.5 miles south-west), Library (1.1 miles north), Union Terrace Gardens (within half a mile west) and Robert Gordon's College (less than half a mile west). There’s a railway station in New Aberdeen itself: Aberdeen station. Further afield, we also cover the area around Aberdeen Castle (less than half a mile north-east) and Tolbooth Museum (under half a mile west). The countryside around New Aberdeen includes Gallows Hill and Lower Lake.

Map of New Aberdeen © OpenStreetMap contributors

The process

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can typically be used the next day.

Before we arrive

  • Clear the area around the damage
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Read more

What affects the price in New Aberdeen

Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • The material

We charge the same wherever you are, so there is no premium for New Aberdeen. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the whole bath
  • One sharp close-up of the damage
  • Where you are, by postcode

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

What we cannot put right

Some jobs aren’t right for a repair, including:

  • A bath split right through the body
  • A bath that is rusted through
  • A poorly supported acrylic bath, until it’s firmed up

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in New Aberdeen

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Repair or replace in New Aberdeen?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • Most jobs done in one visit
  • Colour-matched on site
  • No need to remove anything

Take a look at our pricing and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.