Rutland · England

Bath re-enamelling & resurfacing in Oakham, Rutland

Full bath re-enamelling and resurfacing for homes and businesses in Oakham and across Rutland. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Oakham

How the visit works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we are done and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

How to prepare

  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children
  • Clear the area around the damage

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.

Get a free quote

Advice

Bath re-enamelling in Oakham without replacing anything

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair Victorian roll-tops, acrylic baths and basins & shower trays, and common reasons people get in touch are an outdated colour you’d like to change and staining under the taps and around the waste.

Your repair is guaranteed for a year, as with every job we do.

Stained basin resurfaced to clean white (before and after)
Area
Oakham (LE15)
Area hub
Rutland
Warranty
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Landlord and trade work in Oakham

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

When we’d advise against a repair

A repair isn’t right for every job, for example:

  • Problems we can’t see until an old finish comes off
  • An acrylic bath that flexes badly underfoot
  • Steel that has corroded right through

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

Do you need bath re-enamelling in Oakham?

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

These are the problems we are asked about most:

  • An old resurfacing that is failing
  • Thin, worn enamel in places
  • A period or roll-top bath worth keeping
  • Several chips and rust patches

What to look for in a quote

  • How the room is protected while they work
  • Whether a trained technician does the job
  • Whether the price is fixed and includes VAT
  • When it can be used again

Choosing a repair company

About Oakham

Oakham is about 13 miles north of Corby, in Rutland. We visit homes and businesses in Oakham and the surrounding area, so there is no workshop to go to. We cover 47 places in Rutland. We work right across the region, from Oakham to Birmingham (51 miles away).

We work across LE15 and the streets around it. You will find streets such as High Street, Market Place and Market Street. Main roads around Oakham include the A606 and B640, so getting to you is simple. Nearby, we also work in Barleythorpe (1 mile north-west), Egleton (1 mile south-east), Langham (2 miles north-west), Braunston-in-Rutland (2 miles south-west) and Ridlington (4 miles south). Within a short drive, we also cover Uppingham (6 miles south), Cottesmore (4 miles north-east), North Luffenham (6 miles south-east) and Whissendine (4 miles north-west). Oakham is one of the larger places we cover in Rutland.

Near you in Oakham

Locally, our jobs take us to homes close to Cold Overton Park, All Saints' Church and Rutland County College and the streets around them. Other local landmarks include The Wheatsheaf Public House (within half a mile north-east), Oakham CofE Primary School (less than half a mile north-east) and Catmose College (0.5 miles north-west). There’s a railway station in Oakham itself: Oakham station. Further afield, we also cover the area around Burley Castle (2.8 miles north-east) and Rocks by Rail (3.5 miles north-east).

Map of Oakham © OpenStreetMap contributors

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Wipe the bath dry after use in hard water areas
  • Use washing-up liquid and a soft cloth
  • Repair dripping taps early
  • Store bottles off the bath

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Repair or replace in Oakham?

If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking.

Why us?

  • Colours mixed by hand to suit your surface
  • One-year guarantee on every repair
  • Technicians who travel to you, UK-wide
  • Fixed prices from your pictures

See our prices page or guide to resurfacing and replacement costs.

Common questions in Oakham

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

What areas do you cover?

Across the UK, and that includes Oakham. Prices don’t change with location.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Can you make a coloured bath white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How durable is a resurfaced bath?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What do you need from me?

Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.