Norfolk · England

Bath re-enamelling & resurfacing in Oxborough, Norfolk

Local bath re-enamelling for Oxborough: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Oxborough

What happens on the day

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive
  • Let us know if it has been repaired before

Get a quote

Email us a photo of the damage and one of the whole item, and tell us you are in Oxborough, and we will come back with a fixed quote.

Get a fixed price

Read more

Bath re-enamelling at your home in Oxborough

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Whether it’s enamel that’s lost its shine and feels rough and worn patches where water runs and sits, we can typically put it right, whatever the material.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Where
Oxborough (PE33)
Area hub
Norfolk
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Wipe the bath dry after use in hard water areas
  • Store bottles off the bath
  • Have chips seen to early
  • Rinse off hair dye, oils and bath bombs immediately

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

Why repair rather than replace?

A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Why us?

  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • Technicians who travel to you, UK-wide
  • Free fixed quotes from pictures

See our full price list or guide to resurfacing and replacement costs.

Questions from Oxborough

Does the bath have to be removed?

Not at all. We work on the bath in place, with the room masked and ventilated.

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

What does bath re-enamelling cost?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Do you resurface freestanding baths?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Oxborough use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Our work in Oxborough

Oxborough is about 13 miles south-east of King's Lynn, in Norfolk. Customers in Oxborough get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We work in all 797 towns and villages in Norfolk. We work right across the region, from Oxborough to London (80 miles away).

Jobs in PE33 are booked in the same way as anywhere else. From Eastmoor Road, St John's Close and Swaffham Road or anywhere nearby, a technician can come to you. We also travel to Eastmoor (1 mile north-west), Whittington (2 miles south-west), Boughton (3 miles west), Stoke Ferry (3 miles west) and Northwold (3 miles south). Further out, we also cover King's Lynn (13 miles north-west), Thetford (14 miles south-east), Downham Market (8 miles west), Watton (11 miles east), Swaffham (7 miles north-east) and Fairstead (13 miles north-west).

What’s near Oxborough

Our clients here include homes close to Church of St John.

Map of Oxborough © OpenStreetMap contributors

What we’re called out for in Oxborough

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Customers usually contact us about:

  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping
  • Lots of chips and rust spots
  • A bath that stays dull however much you clean it

Before booking anyone

  • Aftercare advice
  • How changes to the job are handled
  • What preparation is included
  • Whether there are any call-out or travel charges

Choosing a repair company

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What a repair can’t fix

We won’t take on work that won’t last, so these are the limits:

  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath
  • A bath split right through the body

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Oxborough

  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.