Dudley · England
Bath re-enamelling & resurfacing in Pedmore, Dudley
Bath re-enamelling in Pedmore without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
Bath re-enamelling in Pedmore without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most frequently call us about worn patches where water runs and sits and a peeling or bubbling previous coating.
All our work comes with our one-year guarantee.
- Location
- Pedmore (DY9, DY8)
- County
- Dudley
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Pedmore questions
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do you cover the entire of Dudley?
We cover the whole UK, including Pedmore and the rest of Dudley. Send your postcode with your photos and we’ll confirm dates.
How much does bath re-enamelling cost in Pedmore?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Are there extra charges for Pedmore?
No. Our quotes include travel, and we charge the same wherever you are.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair will not do:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
How to get a price
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Repair or replace in Pedmore?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Pedmore customers choose us
- Colour-matched on site
- We leave the room as we found it
- Straight answers about what a repair can do
- Work done at your home or business
Take a look at our prices page or resurfacing vs replacement cost guide.
Our work in Pedmore
Pedmore is about 1 mile south-east of Stourbridge, in Dudley. Our repair technicians come to homes and businesses in Pedmore and nearby villages, so you don’t need to take anything anywhere. Pedmore is one of 63 places in Dudley we cover. We work right across the region, from Pedmore to Birmingham (10 miles away).
Every address in DY9 and DY8 is within our area, from the main roads to the quietest streets. Whether you live on Ham Lane, Drew Road and Brook Road or anywhere nearby, we can come to you. Main roads around Pedmore include the A491, so getting to you is simple. Close by, we cover Oldswinford (1 mile north-west), Wollescote (1 mile east), Stourbridge (1 mile north-west), Lye (1 mile north-east) and Norton (1 mile north-west). Within a short drive, we also cover Dudley (5 miles north-east), Halesowen (3 miles east), Kingswinford (4 miles north), Sedgley (6 miles north), Milking Bank (5 miles north) and Hasbury (3 miles east).
Near you in Pedmore
Around Pedmore, we work in homes near The Pedmore High School, Ham Dingle Primary School and Elmfield Rudolf Steiner School. Also close by are The Crabmill pub (under half a mile north-west), Mary Stevens Park (1.1 miles north-west) and Parish Church of St Mary (less than half a mile north-west). Pedmore has its own railway station: Stourbridge Junction station. Well-known places in the area include Lace Guild Museum (2.1 miles north-west) and Corbett Hospital (1.7 miles north). Not far away are Stourton Pit and Wychbury Hill.
When to call us in Pedmore
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- An old resurfacing that’s failing
Questions to ask before you book
- How to look after the finish
- What preparation is included
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
Towns and villages near Pedmore
More services for Pedmore
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Don’t leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- Have chips seen to early
- Repair dripping taps early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlord and trade work in Pedmore
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether we combine several jobs
- The colour and finish to match
- How easy the damage is to reach
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what helps:
- One picture of the entire bath
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Natural light rather than flash
If you’re in Pedmore and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
