East Sussex · England
Bath Re-enamelling in Penhurst
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Penhurst. Free, fixed quotes from your photos.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste

When to call us in Penhurst
Hard water speeds up the wear, and abrasive cleaners do the most damage.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- An old resurfacing that is failing
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
Questions to ask before you book
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- How soon you can use it again
Bath re-enamelling in Penhurst without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s chips and rust in more than one place and an old resurfacing that’s failing, we can typically put it right, whatever the material.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Penhurst (TN33)
- County
- East Sussex
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

Nearby places to Penhurst
Also in Penhurst
What we do, step by step
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Penhurst questions
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
How do I get a price for bath re-enamelling in Penhurst?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your TN33 postcode.
Our work in Penhurst
Penhurst is about 6 miles north-west of Bexhill-on-Sea, in East Sussex. Customers in Penhurst get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in all 289 towns and villages in East Sussex, from the larger towns to small villages. We work right across the region, from Penhurst to London (about 45 miles away).
Our visits in TN33 are booked in the same way as anywhere else. Neighbouring places we cover include Steven's Crouch (2 miles south-east), Netherfield (2 miles north-east), Twelve Oaks (2 miles north), Hollingrove (3 miles north) and Brightling (3 miles north). Within a short drive, we also cover Eastbourne (11 miles south-west), Hastings (8 miles south-east), Bexhill-on-Sea (6 miles south-east), Hailsham (8 miles south-west), Crowborough (14 miles north-west) and St Leonards (8 miles south-east).
Landmarks near Penhurst
Locally, our jobs take us to homes close to The Parish Church of St Michael and Ashburnham Park. The nearest railway station is Battle station, roughly 3.8 miles east of the centre. Well-known places in the area include Battle Museum of Local History (3.2 miles east) and Bexhill Hospital (5.8 miles south-east). For a walk, there is Senlac Hill.
Keeping it looking good
To keep it looking its best:
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Prices and what affects them
Prices start from £350. We price every job individually, from your photos. The main factors are:
- What the surface is made of
- Unusual colours or finishes
- Whether we combine several jobs
- What kind of damage it is
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- A close-up of the damage, in focus
- Where you are, by postcode
- Any earlier repairs or coatings
- Natural light rather than flash
If you are in Penhurst and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What we can’t put right
To be straight with you, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.

