Sandwell · England
Bath Re-enamelling for Pheasey homes
Bath re-enamelling for Pheasey, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
Bath re-enamelling in Pheasey, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We’re often asked to fix an old resurfacing that’s failing and staining under the taps and around the waste, in cast iron baths, Victorian roll-tops and basins & shower trays.
A one-year guarantee comes as standard.
- Area
- Pheasey (B43)
- County
- Sandwell
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we’ll tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Signs you need bath re-enamelling in Pheasey
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- What preparation is included
- What protection goes down before work starts
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- What kind of damage it is
- Any earlier repairs that need removing first
- What the surface is made of
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
How to look after the repair
So the finish stays in good condition for years:
- Do not leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs immediately
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Also near Pheasey
More services for Pheasey
Where we work around Pheasey
Pheasey is about 3 miles south-east of Walsall, in Sandwell. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 33 places across Sandwell. We work right across the region, from Pheasey to Birmingham (6 miles away).
We cover every part of B43 and the streets around it. That includes homes on Linton Road, Leighton Close and Hillingford Avenue. We also cover the places around Pheasey: Queslett (1 mile south), Great Barr (1 mile south-west), Perry Beeches (1 mile south), Tower Hill (2 miles south) and Park Hall (2 miles north-west). Larger places within reach include West Bromwich (4 miles south-west), Tipton (6 miles west), Oldbury (6 miles south-west), Smethwick (5 miles south-west), Rowley Regis (7 miles south-west) and Darlaston (5 miles west).
Local landmarks in Pheasey
Typical jobs here are in homes near Barr Beacon School, Arena Academy and Pheasey Park Farm Primary School, among other places. Nearby too are Turnberry Park (1.1 miles south) and All Saints' Church (0.6 miles south-east). The closest station to Pheasey is Hamstead station, about 2 miles south-west of the centre. Nearby you’ll also find Jerome K Jerome Birthplace Museum (3.6 miles north-west) and Witton Isolation Hospital (1.9 miles south-east). Green spaces nearby include Barr Beacon and Queslett Nature Reserve.
Landlords, agents and businesses in Pheasey
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What a repair can’t fix
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Pheasey: your questions answered
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. You are under no obligation.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
