Norfolk · England
Bath re-enamelling & resurfacing in Pott Row, Norfolk
Our repair technicians come to Pott Row for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that is failing
- Stains that will not shift
Covering Pott Row
Pott Row is about 4 miles east of King's Lynn, in Norfolk. From the centre of Pott Row to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Pott Row is one of 797 towns and villages in Norfolk where we work.
Every address in PE32 is covered. That includes homes on Stave Close, Philip Rudd Court and Ashwicken Road. Nearby, we also work in Grimston (1 mile north-east), Roydon (1 mile north), Congham (1 mile north-east), Ashwicken (2 miles south) and Gayton (2 miles south-east). Within a short drive, we also cover King's Lynn (4 miles west), Downham Market (13 miles south-west), Swaffham (11 miles south-east), Fakenham (14 miles east), Hunstanton (12 miles north) and Fairstead (4 miles west).
What’s near Pott Row
Our customers here include homes close to Church of St Botolph and Holly Meadows School. Other landmarks nearby include Queen Elizabeth Hospital (3.3 miles west) and Castle Rising Keepers Wood (2.5 miles north-west).
Bath re-enamelling in Pott Row without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s chips and rust in more than one place and a period or roll-top bath worth keeping, we can help, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Pott Row (PE32)
- County
- Norfolk
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Pott Row
Other services in Pott Row
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- The material
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
What we are called out for in Pott Row
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.
Most people get in touch when they notice one of these:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Before booking anyone
- How soon you can use it again
- Whether there are any call-out or travel charges
- Who will actually do the work
- How your room will be protected
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Pott Row. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Colour mixed on the day to match
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our prices page and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Pott Row
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Pott Row questions
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you cover the whole of Norfolk?
All of Norfolk, and the rest of the UK. Travel is included in the price.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
