Hertfordshire · England

Bath re-enamelling & resurfacing in Poynders End, Hertfordshire

Bath re-enamelling in and around Poynders End: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Poynders End?

Bath re-enamelling in Poynders End without replacing anything

The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the day after. We are frequently asked to fix worn patches where water runs and sits and a coloured bath you want in white, across basins & shower trays, acrylic baths and Victorian roll-tops.

Whatever the size of the job, it’s backed by a one-year guarantee in Poynders End and across Hertfordshire.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Poynders End (SG4)
County
Hertfordshire
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Avoid suction-cup mats
  • Do not use the bath until it has fully cured
  • A dripping tap should be fixed promptly
  • Wipe the bath dry after use in hard water areas

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repair or replace: which is better?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why Poynders End clients choose us

  • Rooms protected and left tidy
  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing and guide to resurfacing and replacement costs.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day. Before we go, we will explain how long to leave it and how to look after it.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s typically ready the following day.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

Ask for a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a free quote

Related advice

What we’re called out for in Poynders End

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Customers typically contact us about:

  • An outdated colour you’d like to change
  • An old resurfacing that’s failing
  • A bath that stays dull however much you clean it
  • Stains that will not shift

Comparing quotes

  • When it can be used again
  • What preparation is included
  • What protection goes down before work starts
  • Aftercare advice

10 questions to ask before booking

Covering Poynders End

Poynders End is about 3 miles south of Hitchin, in Hertfordshire. Anywhere in SG4, we carry out the work at your property. Poynders End is one of 381 towns and villages in Hertfordshire where we work. Our jobs stretch from Poynders End to London (29 miles away).

All of SG4 is covered, from the main roads to the quietest streets. Nearby, we also work in Temple Dinsley (1 mile south-west), Preston (1 mile west), Langley End (1 mile south-east), Little Almshoe (1 mile north-east) and St Ibbs (1 mile north). Further out, we also cover Hemel Hempstead (13 miles south-west), Stevenage (4 miles east), St Albans (11 miles south), Welwyn Garden City (8 miles south-east), Harpenden (7 miles south-west) and Hitchin (3 miles north).

What’s near Poynders End

Typical jobs here are in homes near Church of St Martin, Preston Primary School and The Red Lion Public House, among other places. The closest station to Poynders End is Stevenage station, roughly 2.8 miles east. Nearby you’ll also find Wymondley Castle (2.8 miles north-east) and North Hertfordshire Museum (2.8 miles north). The countryside around Poynders End includes Purwell Ninesprings and Markham's Hill.

Map of Poynders End © OpenStreetMap contributors

How we price bath re-enamelling

Resurfacing from £350. We price every job individually, from your pictures. What matters most is:

  • Unusual colours or finishes
  • The material
  • Whether old repairs or coatings need taking off
  • How much damage there is

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • Something in shot to show the size
  • A clear, close picture of the problem area
  • Any details about the material
  • Good light, ideally daylight, without flash glare

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Hertfordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Common questions in Poynders End

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

What areas do you cover?

The entire UK, including all of Hertfordshire. Just include your postcode and we’ll confirm dates.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.