Dudley · England

Bath Re-enamelling in Quarry Bank

Full bath re-enamelling and resurfacing at your home in Quarry Bank, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Quarry Bank

Our work in Quarry Bank

Quarry Bank is about 1 mile east of Brierley Hill, in Dudley. Clients in Quarry Bank get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Quarry Bank is one of 63 towns and villages in Dudley we cover. We work right across the region, from Quarry Bank to Birmingham (9 miles away).

Jobs in DY5, B63 and B64 are booked in the same way as anywhere else. From Park Road, Farm Road and Acres Road or anywhere nearby, we can come to you. Quarry Bank sits on or near the A4036 and A4100, which makes travel easy. Neighbouring places we cover include Brierley Hill (1 mile west), Lye (1 mile south), Woodside (1 mile north), Wollescote (2 miles south) and Stourbridge (2 miles south-west). Within a short drive, we also cover Kingswinford (3 miles north-west), Sedgley (4 miles north), Milking Bank (3 miles north), Norton (3 miles south-west), Eve Hill (3 miles north) and Wall Heath (4 miles north-west).

Near you in Quarry Bank

Around Quarry Bank, we work in homes near Saltwells Local Nature Reserve, Christ Church and The Abraham Darby pub, among other places. Also close by are Mount Pleasant Primary School (under half a mile north-west) and Thorns Collegiate Academy (0.5 miles south-west). Quarry Bank’s nearest station is Cradley Heath station, about 0.7 miles east of the centre. Other landmarks nearby include Lace Guild Museum (1.9 miles west) and Corbett Hospital (1.7 miles west). Open spaces near Quarry Bank include Wychbury Hill and Portway Hill.

Map of Quarry Bank © OpenStreetMap contributors

Bath re-enamelling at your home in Quarry Bank

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our repair technicians work on pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about a dull, rough surface that won’t come clean and an old resurfacing that’s failing.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Roll-top bath being refinished by a Surface Doctor technician
Location
Quarry Bank (DY5, B63, B64)
Region
Dudley
Guarantee
A year, on every repair
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Your questions about bath re-enamelling in Quarry Bank

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Do you cover Quarry Bank?

We do. Repair technicians travel to Quarry Bank from across the region, and the price is the same as everywhere else.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first, so mention it when you send pictures.

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.

How to care for the repair

Once the work has cured, treat it gently:

  • Don’t leave bottles, razors or sponges standing on the surface
  • Wipe the bath dry after use in hard water areas
  • A dripping tap should be fixed promptly
  • Have chips seen to early

Wipe the bath dry after use where you can, and rinse off any bath products.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Landlords, agents and businesses in Quarry Bank

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

What we do, step by step

On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s usually ready the next day.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Ensure the area is dry
  • Keep children and pets away from the room on the day

How to get a price

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Read more

Should you replace it?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Prices start from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.

What you get with us

  • No need to remove anything
  • We come to you, anywhere in the UK
  • Colour mixed on the day to match
  • Honest advice, even when it means no job

Read our full price list and bath cost comparison.

Prices and what affects them

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • How much damage there is

We charge the same wherever you are, so there’s no premium for Quarry Bank. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what helps:

  • A picture taken from further back
  • Natural light rather than flash
  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale

Send us a photo of the damage and a wider shot of the whole item, with your DY5 postcode, and we will come back with a fixed quote.

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Signs you need bath re-enamelling in Quarry Bank

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.

Signs it’s time to call us include:

  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • Chips and rust in more than one place
  • Wear marks under the taps

What to look for in a quote

  • How soon you can use it again
  • How your room will be protected
  • Whether the colour is mixed to match
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.