Cornwall · England
Bath Re-enamelling in Raginnis
Full bath re-enamelling and resurfacing at your home in Raginnis, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough

Bath re-enamelling in Raginnis without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s wear marks under the taps and a bath that stays dull however much you clean it, we can generally put it right.
All of our repairs are guaranteed for twelve months in Raginnis and everywhere else. If something goes wrong with the work, we come back.

- Where
- Raginnis (TR19)
- Region
- Cornwall
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Honest limits
Some jobs aren’t right for a repair, for example:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Prices and what affects them
Resurfacing from £350. We price every job individually. The main factors are:
- The size and number of damaged areas
- Access to the area
- Whether old repairs or coatings need taking off
- How hard the colour is to match
A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Send photos for a quote
Two or three clear photos are generally enough. It helps if you send:
- Any earlier repairs or coatings
- Natural light rather than flash
- The material, if you know it
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Our work in Raginnis
Raginnis is about 3 miles south of Penzance, in Cornwall. Jobs in Raginnis are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Raginnis is one of 644 towns and villages in Cornwall we cover.
Every address in TR19 is covered, from the main roads to the quietest streets. If you are just outside Raginnis, we cover Mousehole (1 mile north-east), Trevithal (1 mile north), Sheffield (1 mile north-west), Paul (1 mile north) and Lamorna (1 mile south-west). Larger places within reach include Camborne (15 miles north-east), Penzance (3 miles north), Helston (12 miles east), Hayle (10 miles north-east), St Ives (10 miles north) and Rosewarne (15 miles north-east).
Local landmarks in Raginnis
Locally, our jobs take us to homes close to Church of St Clement (methodist ), Mousehole Community Primary School and The Ship Inn and the streets around them. The nearest railway station is Penzance station, roughly 3.2 miles north of the centre. Well-known places in the area include Lescudjack Hill Fort (3.4 miles north) and West Cornwall Hospital (3.1 miles north). Not far away are Marazion Marsh RSPB Reserve.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know about parking or access
How to get a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Signs you need bath re-enamelling in Raginnis
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Customers usually contact us about:
- Stains that won’t shift
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Worn patches where water runs and sits
What to look for in a quote
- How to look after the finish
- What preparation is included
- How long it needs to cure
- How your room will be protected
More services for Raginnis
Raginnis questions
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.

