Essex · England
Bath Re-enamelling for Ramsden Heath homes
Bath re-enamelling for Ramsden Heath, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Several chips and rust patches
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- Honest advice, even when it means no job
See our prices page or bath cost comparison.
Bath re-enamelling at your home in Ramsden Heath
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We’re often asked to fix a roll-top that’s seen better days and a bath that stays dull however much you clean it, across acrylic baths, basins & shower trays and Victorian roll-tops.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Ramsden Heath (CM11)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
It helps to know what we can’t do:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Common questions in Ramsden Heath
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Places near Ramsden Heath
More services for Ramsden Heath
Landlord and trade work in Ramsden Heath
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Ramsden Heath, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:
- The material
- Doing more than one item at once
- What kind of damage it is
- Unusual colours or finishes
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
You can take the photos on your phone. Just ensure we can see:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- The material, if you know it
- A photo taken from further back
Upload a picture of the damage and a wider shot of the entire item, with your CM11 postcode, and we’ll reply with a fixed price.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Covering Ramsden Heath
Ramsden Heath is about 2 miles east of Billericay, in Essex. Across the CM11 area, a technician comes to you. Ramsden Heath is one of 644 places in Essex where we work. You can also see our page for London, about 26 miles away.
Our visits in CM11 are booked in the same way as anywhere else. Streets in the area include Church Road, Recreation Walk and Dowsetts Lane, all of which we cover. If you are just outside Ramsden Heath, we cover Downham (1 mile east), Ramsden Bellhouse (1 mile south-east), Stock (2 miles north-west), Billericay (2 miles west) and Crays Hill (2 miles south). Larger places within reach include Chelmsford (7 miles north), Basildon (5 miles south), Brentwood (7 miles west), Maldon (11 miles north-east), Canvey Island (9 miles south-east) and Rayleigh (7 miles south-east).
What’s near Ramsden Heath
Our customers here include homes close to Mayflower High School, Church of St Mary and The White Horse Public House. The nearest railway station is Billericay station, roughly 2.4 miles west of the centre. A little further out are Mayflower Community Hospital (3.1 miles west) and Barleylands Farm Museum (2.7 miles south-west). Green spaces nearby include Crowsheath Wood.
What we are called out for in Ramsden Heath
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Questions to ask before booking
- Who turns up on the day
- What happens if the damage is worse than the photos show
- If travel is included in the price
- Whether cleaning and preparation are in the price
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we’ll tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
How to look after the repair
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
