Northumberland · England
Bath Re-enamelling for Redburn homes
We travel to Redburn for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
Bath re-enamelling in Redburn, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with wear marks under the taps and a bath that stays dull however much you clean it, we can usually put it right, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Redburn (NE47)
- County
- Northumberland
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- The material
- How much damage there is
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- Natural light rather than flash
- One picture of the entire bath
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Get a quote
For a price in Redburn, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
When a repair is not the answer
It helps to know what we can’t do too:
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Signs you need bath re-enamelling in Redburn
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
Questions to ask before booking
- What the guarantee covers, and for how long
- How long it needs to cure
- Whether a trained technician does the job
- How changes to the job are handled
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
For anyone letting property in or around Redburn, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Never use suction bath mats
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Common questions in Redburn
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What happens next?
You will get a fixed quote back. You’re under no obligation.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Covering Redburn
Redburn is about 22 miles west of Consett, in Northumberland. Our technicians come to customers in Redburn and nearby villages, so you do not need to take anything anywhere. Redburn is one of 189 places in Northumberland we cover. Our jobs stretch from Redburn to Newcastle upon Tyne (about 29 miles away).
All of NE47 is within our area. Jobs here include addresses on Falcon Grange and Towhouse Green. Nearby, we also work in Henshaw (1 mile west), Bardon Mill (1 mile east), Plenmeller (4 miles west), Chesterwood (4 miles east) and Haltwhistle (4 miles west).
What’s near Redburn
Our customers here include homes close to Bowes Hotel, Church of All Hallows and Henshaw Church of England Voluntary Aided Primary School and the streets around them. The closest station to Redburn is Bardon Mill station, roughly 0.5 miles east of the centre. A little further out are Haltwhistle War Memorial Hospital (4.2 miles west) and Housesteads Museum (2.9 miles north-east). The countryside around Redburn includes Grindon Lough nature reserve and Crag Lough.
Nearby places to Redburn
What else we do in Redburn
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
