Newport · Wales
Bath Re-enamelling for Rogerstone homes
Bath re-enamelling in Rogerstone without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- A coating lifting around the plughole
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How we handle bath re-enamelling in Rogerstone
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with lots of chips and rust spots and a dull, rough surface that won’t come clean, we can help, on pressed steel baths, cast iron baths and basins & shower trays alike.
All our work is covered by a one-year guarantee, wherever you are in Newport.
- Where
- Rogerstone (NP10)
- Area hub
- Newport
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Rogerstone
More services for Rogerstone
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Rogerstone. What changes the price is:
- Access to the area
- The type of damage
- How hard the colour is to match
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send photos for a quote
Two or three clear photos are generally enough. It helps if you send:
- A close-up of the damage, in focus
- Any details about the material
- Any earlier repairs or coatings
- One picture of the entire bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Signs you need bath re-enamelling in Rogerstone
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- Brown or grey marks that do not clean off
- An old resurfacing that’s failing
- A coloured bath you want in white
- Worn patches where water runs and sits
Comparing quotes
- How soon you can use it again
- How to look after the finish
- What happens if they find more damage
- Who turns up on the day
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Newport and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Aftercare tips
So the finish stays in good condition for years:
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repair or replace in Rogerstone?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- One-year guarantee on every repair
- No need to remove anything
- Straight answers about what a repair can do
- One price list for the whole UK
Take a look at our pricing or bath cost comparison.
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Your questions about bath re-enamelling in Rogerstone
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
How do I get a price for bath re-enamelling in Rogerstone?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Rogerstone and nearby
Rogerstone (Welsh: Tŷ-Du) is about 3 miles west of Newport, in Newport. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 69 towns and villages in Newport. You can also see our page for Birmingham, about 78 miles away.
Here we cover the NP10 postcode area. Streets in the area include Acorn Close, Waterside Close and Roberts Close. Rogerstone sits on or near the B4591, which makes travel easy. If you are just outside Rogerstone, we cover High Cross (1 mile south-east), Rhiwderin (1 mile south-west), Garth (1 mile south), Bassaleg (1 mile south) and Graig (1 mile south). Larger places within reach include Newport (3 miles east), Victoria (3 miles east), Stow Hill (3 miles east), Maindee (3 miles east), Summer Hill (4 miles east) and Barnardtown (3 miles east).
Local landmarks in Rogerstone
Around Rogerstone, we work in homes near St John the Baptist Church, Tredegar Arms and Mount Pleasant Primary and the streets around them. There is a railway station in Rogerstone itself: Rogerstone station. Nearby you will also find St Woolos Hospital (2.5 miles east) and Friars Walk (2.8 miles east). Open spaces near Rogerstone include Graig Ddifaith and Somerton.
About our accreditations · Every repair comes with a one-year guarantee.
