Dudley · England
Bath re-enamelling & resurfacing in Romsley, Dudley
We travel to Romsley for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Landlords, agents and businesses in Romsley
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Bath re-enamelling in Romsley, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are chips and rust in more than one place and brown or grey marks that don’t clean off.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Romsley (B62)
- Region
- Dudley
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Store bottles off the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What we cannot put right
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Natural light rather than flash
- A clear, close picture of the problem area
- Where you are, by postcode
Upload pictures of the damage and a wider shot of the whole item, with your B62 postcode, and we’ll come back with a fixed quote.
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes most of the day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Make sure the area is dry
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Common problems we fix in Romsley
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Signs it’s time to call us include:
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
Comparing quotes
- How soon you can use it again
- How your room will be protected
- How to look after the finish
- What happens if they find more damage
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Straight answers about what a repair can do
- Usually one visit, start to finish
- Colour-matched on site
- No need to remove anything
Take a look at our prices page or bath cost comparison.
Romsley: your questions answered
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Romsley and the surrounding area
Romsley is about 3 miles south of Halesowen, in Dudley. From the centre of Romsley to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 63 towns and villages across Dudley. We work right across the region, from Romsley to Birmingham (about 8 miles away).
Our repair technicians cover all of the B62 postcode area. Streets in the area include Waverley Crescent, The Hedgerows and Hillcrest Road, and we cover them all. Romsley sits on or near the B4551, so getting to you is simple. Close by, we cover Hunnington (1 mile north), Dayhouse Bank (1 mile south-east), Gannow Green (2 miles south-east), Frankley Green (2 miles east) and Walton Pool (2 miles west). Further out, we also cover Dudley (6 miles north), Halesowen (3 miles north), Stourbridge (4 miles north-west), Kingswinford (7 miles north-west), Sedgley (8 miles north) and Brierley Hill (5 miles north-west).
Around Romsley
Locally, our jobs take us to homes close to St. Kenelm's Church Hall, Frankley Community High School and Romsley St Kenelm's CofE Primary School. The closest station to Romsley is Longbridge station, about 3.6 miles east. Further afield, we also cover the area around Castlebourne folly (2.1 miles south-west) and Rubery Hill Hospital (2.3 miles south-east). The countryside around Romsley includes Walton Hill and Chaddesley Woods National Nature Reserve.
Also in Romsley
About our accreditations · Every repair comes with a one-year guarantee.
