Bury · England
Bath Re-enamelling for Shuttleworth homes
Our technicians come to Shuttleworth for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
When to call us in Shuttleworth
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for these signs:
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
- Wear marks under the taps
Before booking anyone
- When it can be used again
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- How changes to the job are handled
Bath re-enamelling in Shuttleworth without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We’re frequently asked to fix thin, worn enamel in places and a coating lifting around the plughole, on cast iron baths, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Where
- Shuttleworth (BL0)
- County
- Bury
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- One picture of the entire bath
- Something in shot to show the size
- Details of any past repairs
If you are in Shuttleworth and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Common questions in Shuttleworth
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What areas do you cover?
The entire UK, including all of Bury. Send your postcode with your pictures and we’ll confirm dates.
Can you quote from photos?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bury.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Aftercare tips
Simple care helps the repair last. Our advice:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs right away
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Our work in Shuttleworth
Shuttleworth is about 1 mile north-east of Ramsbottom, in Bury. Anywhere in BL0, we come to you. Shuttleworth is one of 40 towns and villages in Bury we cover. We work right across the region, from Shuttleworth to Manchester (about 13 miles away).
We cover every part of the BL0 postcode area and the streets around it. Whether you live on Church Road, Richard Street and Bye Road or anywhere nearby, we can come to you. If you are just outside Shuttleworth, we cover Stubbins (1 mile north-west), Chatterton (1 mile north-west), Edenfield (1 mile north), Strongstry (1 mile north-west) and Holcombe (1 mile south-west). Larger places within reach include Bury (4 miles south), Radcliffe (6 miles south), Prestwich (9 miles south), Whitefield (7 miles south), Besses o' th' Barn (8 miles south) and Tottington (3 miles south-west).
What’s near Shuttleworth
We visit homes around Grant Arms Hotel, Woodhey High School and St. John Shuttleworth, among other places. The closest station to Shuttleworth is Entwistle station, roughly 4.5 miles west of the centre. Well-known places in the area include Helmshore Mills Textile Museum (Higher Mill) (2.9 miles north-west) and Rossendale General Hospital (3.1 miles north). For a walk, there’s Hail Storm Hill.
Towns and villages near Shuttleworth
Other services in Shuttleworth
Repair or replace in Shuttleworth?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Most jobs done in one visit
- Work done at your home or business
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our prices page or guide to resurfacing and replacement costs.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes a full day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
