South Ayrshire · Scotland

Bath Re-enamelling for Smyrton homes

Bath re-enamelling across Smyrton and nearby, typically in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Smyrton homes

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Repair dripping taps early
  • Have chips seen to early
  • Leave the bath for the full curing time before using it
  • Don’t let dyes or oils sit on the finish

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

Bath re-enamelling at your home in Smyrton

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are often asked to fix staining under the taps and around the waste and worn patches where water runs and sits, in pressed steel baths, acrylic baths and cast iron baths.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Area
Smyrton (KA26)
Area hub
South Ayrshire
Warranty
One year on every repair
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Do you need bath re-enamelling in Smyrton?

Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.

If you can see any of these, send us a picture:

  • A period or roll-top bath worth keeping
  • Several chips and rust patches
  • Brown or grey marks that don’t clean off
  • A coloured bath you want in white

Before you book anyone

  • Who will actually do the work
  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • Whether there are any call-out or travel charges

Our hiring checklist

Smyrton: your questions answered

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Do you come to Smyrton?

Yes. We cover the whole UK and travel to Smyrton. Send us photos for a fixed quote, or call 0345 017 0787.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so let us know about it.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Repairing versus replacing in Smyrton

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.

Why choose Surface Doctor in Smyrton

  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Colour-matched on site
  • We will tell you if it’s not worth repairing

Read our pricing or resurfacing vs replacement cost guide.

Landlord and trade work in Smyrton

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

If you manage property in Smyrton, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Smyrton and nearby

Smyrton is about 12 miles north of Stranraer, in South Ayrshire. We travel to homes and businesses in Smyrton and the surrounding area, so nothing has to leave your home. Smyrton is one of 52 towns and villages in South Ayrshire where we work. We work right across the region, from Smyrton to Glasgow (60 miles away).

Here we cover the KA26 postcode area. Local streets include Smyrton Hill and Old Smyrton. Neighbouring places we cover include Ballantrae (2 miles north-west), Colmonell (5 miles north-east), Lendalfoot (6 miles north), Pinwherry (7 miles north-east) and Cairnryan (8 miles south).

Local landmarks in Smyrton

Nearby you will also find Ardstinchar Castle (1.6 miles north-west). Open spaces near Smyrton include Downan Hill.

Map of Smyrton © OpenStreetMap contributors

How the visit works

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for the best part of a day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Open a window if you can
  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed quote

Read more

Prices and what affects them

Resurfacing from £350. We do not charge extra for travel to Smyrton. The price comes down to:

  • How hard the colour is to match
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of

A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • Any details about the material
  • Something in shot to show the size

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.