Shropshire · England
Bath Re-enamelling for Snitton homes
We travel to Snitton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift
Repairing versus replacing in Snitton
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Snitton
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, pressed steel baths and acrylic baths, and common reasons people get in touch are chips and rust in more than one place and worn patches where water runs and sits.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Snitton (SY8)
- Area hub
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Snitton
Other services in Snitton
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Snitton and the surrounding area
Snitton is about 14 miles south-west of Bridgnorth, in Shropshire. We travel to clients in Snitton, so you don’t need to take anything anywhere. Snitton is one of 433 places in Shropshire where we work. We work right across the region, from Snitton to Birmingham (about 32 miles away).
Every address in SY8 is covered. If you’re just outside Snitton, we cover Snittongate (1 mile south-east), Bitterley (1 mile north), Farden (1 mile east), Henley (1 mile west) and Middleton (1 mile north-west). Further out, we also cover Bridgnorth (14 miles north-east), Ludlow (3 miles west), Church Stretton (13 miles north-west), Craven Arms (9 miles north-west), Much Wenlock (15 miles north) and Cleobury Mortimer (7 miles east).
What’s near Snitton
Typical jobs here are in homes near Bitterley CofE Primary School (Aided) and Church of St Mary and the streets around them. The nearest railway station is Ludlow station, roughly 2.9 miles west of the centre. A little further out are Ludlow Castle (3.3 miles west) and Ludlow Community Hospital (2.8 miles west). The countryside around Snitton includes Titterstone Clee Hill and Catherton Common.
Questions from Snitton
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Do you cover the whole of Shropshire?
All of Shropshire, and the rest of the UK. There is no extra charge for travel.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Never use suction bath mats
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
The process
Arrival times are agreed in advance. Once we’re there, the work takes most of the day. The room is left tidy and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
Work for landlords and builders
For anyone letting property in or around Snitton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Access to the area
- How hard the colour is to match
- The size and number of damaged areas
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- What it’s made of, if you know
- A coin beside the damage so we can judge size
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
