Essex · England
Bath re-enamelling & resurfacing in Stambourne, Essex
Fixed-price bath re-enamelling in Stambourne and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
Bath re-enamelling in Stambourne, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most frequently call us about a peeling or bubbling previous coating and thin, worn enamel in places.
Whatever the size of the job, you get the same one-year guarantee in Stambourne and across Essex.
- Where
- Stambourne (CO9)
- County
- Essex
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Stambourne: your questions answered
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Our work in Stambourne
Stambourne is about 5 miles south-east of Haverhill, in Essex. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Our technicians cover all 644 towns and villages across Essex. You can also see our page for London, about 44 miles away.
Our technicians cover all of the CO9 postcode area and the streets around it. That includes homes on Church Road and Chapel End Way and the roads around them. Other places close to Stambourne include Dyer's End (1 mile south-east), Wesley End (1 mile north), Toppesfield (1 mile south-east), Ridgewell (2 miles north-east) and Oaker Hill (2 miles east). We also work in nearby towns such as Braintree (10 miles south), Saffron Walden (11 miles west), Halstead (8 miles south-east), Great Dunmow (12 miles south-west), Stansted Mountfitchet (15 miles south-west) and Great Notley (11 miles south).
Local landmarks in Stambourne
Our customers here include homes close to The Red Lion Public House and Parish Church of St Peter and St Thomas and the streets around them. A little further out are Toppesfield Museum of The Working Horse (1.5 miles south-east) and Hedingham Castle (4.6 miles south-east).
- Parks and local facilities nearby include Bumpstead Rural District (2.4 miles north-west)
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Access to the area
- Unusual colours or finishes
- The material and finish
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- A wider photo showing the entire bath
- Any details about the material
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Do not let dyes or oils sit on the finish
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What a repair can’t fix
A repair isn’t right for every job, including:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Also near Stambourne
Other services in Stambourne
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why choose Surface Doctor in Stambourne
- A year’s guarantee on all work
- Everything repaired in place
- Honest advice, even when it means no job
- Same prices wherever you are
See our prices page or bath cost comparison.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we are done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Do you need bath re-enamelling in Stambourne?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Wear marks under the taps
- A bath that stays dull however much you clean it
What your quote should include
- How the room is protected while they work
- What aftercare is recommended
- When it can be used again
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
