Norfolk · England

Bath Re-enamelling for Stanhoe homes

Bath re-enamelling in and around Stanhoe: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Stanhoe

Prices and what affects them

Resurfacing from £350. We do not charge extra for travel to Stanhoe. The price comes down to:

  • Previous DIY repairs that have to come out
  • Access to the area
  • What kind of damage it is
  • How many items we do on one visit

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

Two or three clear pictures are typically enough. Try to include:

  • A clear, close picture of the problem area
  • Any details about the material
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Bath re-enamelling in Stanhoe, done in place

Most baths are re-enamelled in a day. Nothing is disconnected or removed. Our technicians work on cast iron baths, basins & shower trays and acrylic baths, and common reasons people contact us are a roll-top that’s seen better days and staining under the taps and around the waste.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Location
Stanhoe (PE31)
Area hub
Norfolk
Cover
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What happens on the day

We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. It normally takes the best part of a day.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat
  • Let us know if it has been repaired before

Getting a price

To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Send photos for a quote

Read more

Stanhoe: your questions answered

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we will plan for it.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Will the price change on the day?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Is there a smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Norfolk.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Stanhoe and nearby

Stanhoe is about 15 miles north-east of King's Lynn, in Norfolk. We travel to homes and businesses in Stanhoe and the surrounding area, so you do not need to take anything anywhere. Stanhoe is one of 797 places in Norfolk we cover.

Our technicians cover all of the PE31 postcode area and the streets around it. From Station Road, Cross Lane and Docking Road or anywhere nearby, we can come to you. We also cover the places around Stanhoe: Docking (2 miles west), North Creake (3 miles east), Syderstone (3 miles south-east), South Creake (4 miles east) and Great Bircham (4 miles south-west). Within a short drive, we also cover King's Lynn (15 miles south-west), Fakenham (8 miles south-east), Hunstanton (8 miles west), Fairstead (14 miles south-west), Heacham (8 miles west) and North Lynn (15 miles south-west).

Local landmarks in Stanhoe

Typical jobs here are in homes near Church of All Saints and the streets around them.

Map of Stanhoe © OpenStreetMap contributors

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

What we cannot put right

We won’t take on work that will not last, so these are the limits:

  • Steel that has corroded right through
  • A cast iron or steel bath that is cracked right through
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we will say what we think before you book.

Materials we work on in Stanhoe

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Signs you need bath re-enamelling in Stanhoe

Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.

Look out for these signs:

  • An original cast iron bath that needs restoring
  • A coloured bath you want in white
  • A peeling or bubbling previous coating
  • Enamel that’s lost its shine and feels rough

What your quote should include

  • How soon you can use it again
  • How your room will be protected
  • A fixed quote, and whether VAT is included
  • What prep work is covered

How to compare quotes

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Avoid suction-cup mats
  • Store bottles off the bath
  • Wash away dyes and oils after use
  • Have chips seen to early

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Repairing versus replacing in Stanhoe

If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Stanhoe customers choose us

  • No extra charge for your area
  • One visit for most repairs
  • A year’s guarantee on all work
  • Fixed prices from your photos

Take a look at our full price list and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.