Gwynedd · Wales
Bath Re-enamelling in Tanygrisiau
Bath re-enamelling for Tanygrisiau, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Bath re-enamelling at your home in Tanygrisiau
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you are dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can help.
All our work is covered by a one-year guarantee.
- Where
- Tanygrisiau (LL41)
- Area hub
- Gwynedd
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What we are called out for in Tanygrisiau
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- Lots of chips and rust spots
- Worn patches where water runs and sits
- Stains that will not shift
- An original cast iron bath that needs restoring
Before you book anyone
- What the guarantee covers, and for how long
- Who will actually do the work
- Whether the colour is mixed to match
- What aftercare is recommended
Where we work around Tanygrisiau
Tanygrisiau is about 18 miles south-east of Bangor, in Gwynedd. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Tanygrisiau is one of 165 towns and villages in Gwynedd we cover. We work right across the region, from Tanygrisiau to Liverpool (about 52 miles away).
Our visits in LL41 are booked in the same way as anywhere else. From Cwmorthin Road and Glan yr Afon Terrace or a nearby road, a technician can come to you. We also travel to Glan-y-pwll (1 mile north-east), Blaenau Ffestiniog (1 mile north-east), Tyddyn gwyn (1 mile east), Ffestiniog (1 mile east) and Congl-y-wal (1 mile east). Within a short drive, we also cover Bethesda (14 miles north), Gerlan (14 miles north), Braichmelyn (13 miles north), Porthmadog (8 miles south-west), Llanberis (12 miles north-west) and Criccieth (12 miles south-west).
What’s near Tanygrisiau
Our clients here include homes close to Commercial Hotel, Ysgol Gynradd Tanygrisiau and St David's Church and the streets around them. The closest station to Tanygrisiau is Blaenau Ffestiniog station, roughly 1 mile north-east. Nearby you’ll also find Oakley Arms (3.2 miles south-west) and Ffestiniog Memorial Hospital (1.1 miles east). The countryside around Tanygrisiau includes Cefn Trwsgl and Coedydd Maentwrog National Nature Reserve.
What affects the price in Tanygrisiau
Resurfacing from £350. There is no charge for travel to Tanygrisiau. The price comes down to:
- How much damage there is
- Where the damage is and how we get to it
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
It only takes a minute to photograph the damage. Please include:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- One picture of the entire bath
- A coin beside the damage so we can judge size
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Places near Tanygrisiau
What else we do in Tanygrisiau
When a repair isn’t the answer
It helps to know what we can’t do:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Tanygrisiau questions
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Tanygrisiau as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Repairing versus replacing in Tanygrisiau
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Tanygrisiau customers choose us
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- One visit for most repairs
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
