Leeds · England
Bath Re-enamelling in Thorner
Our repair technicians come to Thorner for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
What affects the price in Thorner
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Whether old repairs or coatings need taking off
- The material
- Doing more than one item at once
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Two or three clear pictures are generally enough. It helps if you send:
- Details of any past repairs
- Something in shot to show the size
- The material, if you know it
- Daylight if possible, and no flash reflection
Most clients in Thorner get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Bath re-enamelling at your home in Thorner
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We are often asked to fix wear marks under the taps and several chips and rust patches, in Victorian roll-tops, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Thorner (LS14)
- Region
- Leeds
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Thorner
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A bath in a colour that no longer suits
- Stains that won’t shift
- An old resurfacing that’s failing
- A roll-top that is seen better days
What to look for in a quote
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
- Aftercare advice
- How soon you can use it again
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Thorner. The job itself decides the price: the material, the amount of damage and how many items.
Why Thorner clients choose us
- Straight answers about what a repair can do
- No need to remove anything
- A fixed quote before you book
- We leave the room as we found it
Read our pricing and bath cost comparison.
Covering Thorner
Thorner is about 5 miles south of Wetherby, in Leeds. Wherever you are in the LS14 postcode area, a technician comes to you. We cover 198 places in Leeds, from the larger towns to small villages. Our nearest city page is Leeds, about 6 miles away.
Every address in LS14 is covered, from the main roads to the quietest streets. Local streets include Main Street, Camp Square and Moat End, and we cover them all. Other places close to Thorner include Sandhills (1 mile south-west), Scarcroft (1 mile north-west), Whinmoor (2 miles south-west), Shadwell (2 miles west) and Bardsey (2 miles north). Larger places within reach include Leeds (6 miles south-west), Morley (10 miles south-west), Pudsey (11 miles west), Rothwell (8 miles south), Beeston (8 miles south-west) and Farsley (11 miles west).
Landmarks near Thorner
Our clients here include homes close to Thorner Church of England Primary School, Mexborough Arms and St. Peter's Church. The closest station to Thorner is Cross Gates station, roughly 3.8 miles south of the centre. A little further out are Seacroft Hospital (4.1 miles south-west) and Harewood Castle (4.8 miles north-west). The countryside around Thorner includes Norwood Bottoms.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Thorner questions
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your LS14 postcode.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Ensure the room can be ventilated
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Get a quote
If you are in Thorner and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Landlords, agents and businesses in Thorner
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Landlords, letting agents and housing providers in Thorner use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What else we do in Thorner
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
