Dumfries and Galloway · Scotland
Bath re-enamelling & resurfacing in Thornhill, Dumfries and Galloway
Full bath re-enamelling and resurfacing in Thornhill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
Bath re-enamelling in Thornhill, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are several chips and rust patches and a roll-top that’s seen better days.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Thornhill (DG3)
- County
- Dumfries and Galloway
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair won’t do:
- Holes rusted through the metal
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Covering Thornhill
Thornhill is about 13 miles north-west of Dumfries, in Dumfries and Galloway. Clients in Thornhill get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Thornhill is one of 138 places in Dumfries and Galloway where we work. You can also see our page for Glasgow, about 47 miles away.
All of DG3 is covered, from the main roads to the quietest streets. That includes homes on Drumlanrig Street, West Morton Street and St Cuthbert's Walk. Nearby, we also work in Keir Mill (2 miles south-west), Carronbridge (2 miles north), Penpont (2 miles west), Closeburn (2 miles south-east) and Wallaceton (5 miles south). Further out, we also cover Dumfries (13 miles south-east), Moffat (14 miles north-east), Heathhall (13 miles south-east), Newbridge Drive (12 miles south-east), Lochmaben (15 miles south-east) and Troqueer (14 miles south-east).
Local landmarks in Thornhill
Around Thornhill, we work in homes near Thornhill and Wallace Hall Academy. Nearby you will also find Morton Castle (2.5 miles north) and Thornhill Hospital (less than half a mile south). For a walk, there’s Bellstane Loch.
Common questions in Thornhill
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What happens after I send photos?
We review the photos and send a fixed quote and the next dates we have.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
How much does bath re-enamelling cost in Thornhill?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Also near Thornhill
Also in Thornhill
Looking after it afterwards
How the surface is treated afterwards matters:
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Do not use the bath until it has fully cured
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How it works
The work is clean and fairly quiet. Protection goes down first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Clear the area around the damage
- Keep a parking space free if you can
- Let us know which floor the room is on
Get a quote
If you are in Thornhill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Common problems we fix in Thornhill
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Questions to ask before booking
- Whether the price covers travel
- Aftercare advice
- Whether a trained technician does the job
- How the colour is matched
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
