Gwynedd · Wales
Bath Re-enamelling in Trefor
Our repair technicians come to Trefor for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Trefor
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and people most often call us about a roll-top that’s seen better days and an old resurfacing that’s failing.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Trefor (LL54)
- Area hub
- Gwynedd
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Let us know about parking or access
How to get a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Trefor and the surrounding area
Trefor is about 20 miles south-west of Bangor, in Gwynedd. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 165 places across Gwynedd. We work right across the region, from Trefor to Liverpool (about 68 miles away).
Postcode districts we cover here: LL54. You’ll find streets such as Croes-Higol Road, Stad Llywynaethnen and Maes Gwydir, all of which we cover. We also cover the places around Trefor: Llanaelhaearn (2 miles south-east), Llithfaen (3 miles south-west), Clynnog Fawr (3 miles north-east), Pistyll (4 miles south-west) and Rhos-fawr (5 miles south). Further out, we also cover Caernarfon (12 miles north-east), Pwllheli (7 miles south), Llanbeblig (12 miles north-east), Porthmadog (13 miles east), Morfa Nefyn (7 miles south-west) and Llanberis (15 miles north-east).
Near you in Trefor
Locally, our jobs take us to homes close to St George's Church and the streets around them. Other landmarks nearby include Bryn Beryl hospital (5.8 miles south) and Vortigern Castle (1.8 miles south-west). Green spaces nearby include Garn Fôr and Llyn Glasfryn.
Should you replace it?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- One-year guarantee on every repair
- One visit for most repairs
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
Read our pricing and bath cost comparison.
Towns and villages near Trefor
What else we do in Trefor
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Signs you need bath re-enamelling in Trefor
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for these signs:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Comparing quotes
- How the room is protected while they work
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
Questions from Trefor
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How do I get a price for bath re-enamelling in Trefor?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What affects the price in Trefor
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether old repairs or coatings need taking off
- What the surface is made of
- How hard the colour is to match
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
You can typically get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Any details about the material
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
What we cannot put right
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Have chips seen to early
- Never use suction bath mats
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
