Norfolk · England

Bath Re-enamelling for Tunstead homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Tunstead. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • Several chips and rust patches
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Tunstead

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Do not leave a chip unrepaired
  • Use washing-up liquid and a soft cloth
  • A dripping tap should be fixed promptly
  • Respect the curing time we give you

Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Bath re-enamelling in Tunstead, done in place

We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. If you are dealing with brown or grey marks that don’t clean off and a roll-top that’s seen better days, we can help, on Victorian roll-tops, pressed steel baths and cast iron baths alike.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Tunstead (NR12)
County
Norfolk
Warranty
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Your questions about bath re-enamelling in Tunstead

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Do you resurface freestanding baths?

Yes, often. We resurface the inside, and the outside can be refinished too.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

About Tunstead

Tunstead is about 5 miles south of North Walsham, in Norfolk. Our technicians come to clients in Tunstead and nearby villages, so you don’t need to take anything anywhere. Tunstead is one of 797 towns and villages in Norfolk we cover.

We work across the NR12 postcode area. Whether you live on Market Street, Wateringpit Lane and Manor Close or a nearby road, a technician can come to you. Close by, we cover Ashmanhaugh (1 mile south-east), Upper Street (2 miles north), Beeston St Lawrence (2 miles east), Hoveton (2 miles south) and Sloley (2 miles north). Further out, we also cover Norwich (9 miles south-west), Sprowston (7 miles south-west), Thorpe St Andrew (8 miles south), North Walsham (5 miles north), Caister-on-Sea (15 miles south-east) and Norwich Lanes (9 miles south-west).

Landmarks near Tunstead

In Tunstead, that means homes near Broadland High School, Tunstead Primary School and Church of St Michael, among other places. The nearest railway station is Hoveton & Wroxham station, about 1.9 miles south of the centre. Nearby you’ll also find Hautbois Castle (2.5 miles west). For a walk, there’s Snapes Water and Catfield Fen Reserve.

Map of Tunstead © OpenStreetMap contributors

Landlords, agents and businesses in Tunstead

If you manage property in Tunstead, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Common problems we fix in Tunstead

Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.

It’s worth getting a quote if you see:

  • Several chips and rust patches
  • Stains that won’t shift
  • A period or roll-top bath worth keeping
  • An outdated colour you’d like to change

Before booking anyone

  • What prep work is covered
  • Whether the price covers travel
  • Who turns up on the day
  • How your room will be protected

10 questions to ask before you book

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What bath re-enamelling costs

Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:

  • Unusual colours or finishes
  • Whether we combine several jobs
  • What the surface is made of
  • What kind of damage it is

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from pictures

You can normally get a fixed quote without us visiting. To make it quick:

  • Something in shot to show the size
  • Any details about the material
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

If you are in Tunstead and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

When a repair isn’t the answer

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • A bath split right through the body
  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

What we do, step by step

Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a full day. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Read more

Different materials, different repairs

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.