Hertfordshire · England

Bath re-enamelling & resurfacing in Turnford, Hertfordshire

Bath re-enamelling in Turnford without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Several chips and rust patches
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Turnford

Bath re-enamelling in Turnford, done in place

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are an outdated colour you’d like to change and a bath that stays dull however much you clean it.

All our work comes with our one-year guarantee.

Where
Turnford (EN10, EN8)
County
Hertfordshire
Cover
One year on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Ask for a price

For a price in Turnford, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

What we can’t put right

We will not take on work that will not last, so here’s what a repair cannot put right:

  • A metal bath with a through crack
  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it

Send us photos and we will tell you honestly.

Materials we work on in Turnford

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

When to call us in Turnford

Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.

The things clients typically mention when they call are:

  • A bath that stays dull however much you clean it
  • A peeling or bubbling previous coating
  • Brown or grey marks that do not clean off
  • A roll-top that’s seen better days

Comparing quotes

  • How long it needs to cure
  • How long the guarantee is and what it covers
  • Whether they match the colour on site
  • A fixed price, and whether VAT is included

10 questions to ask before you book

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Looking after it afterwards

Aftercare is simple:

  • Wash away dyes and oils after use
  • Use washing-up liquid and a soft cloth
  • Leave the bath for the full curing time before using it
  • Never use suction bath mats

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Repair or replace: which is better?

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why us?

  • One price list for the entire UK
  • Normally one visit, start to finish
  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do

Take a look at our prices page or guide to resurfacing and replacement costs.

About Turnford

Turnford is about 1 mile north-east of Cheshunt, in Hertfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 381 towns and villages in Hertfordshire, from the larger towns to small villages. We work right across the region, from Turnford to London (16 miles away).

Postcode districts we cover here: EN10 and EN8. You’ll find streets such as Groom Road, Yukon Road and Huron Road, all of which we cover. We also cover the places around Turnford: Wormley (1 mile north), Cheshunt (1 mile south-west), Holyfield (2 miles south-east), Churchgate (2 miles south-west) and Broxbourne (2 miles north). Within a short drive, we also cover Stevenage (15 miles north-west), St Albans (13 miles west), Bishop's Stortford (13 miles north-east), Welwyn Garden City (9 miles north-west), Harpenden (15 miles north-west) and Hatfield (9 miles west).

What’s near Turnford

Around Turnford, we work in homes near Longlands Primary School and Nursery, The Queens Head Public House and Turnford School and the streets around them. Other local landmarks include Cheshunt Park (0.9 miles west) and St Clement (less than half a mile south). For rail, the closest station is Cheshunt station, about 1.3 miles south. A little further out are Nazeing Glass Museum (1.7 miles north-east) and St Michaels Hospital (4.8 miles south-west). Green spaces nearby include Danemead and Cheshunt Lake.

Map of Turnford © OpenStreetMap contributors

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • How easy the damage is to reach
  • Any earlier repairs that need removing first

Our prices are the same across the UK, so there’s no premium for Turnford. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear photos are usually enough. Try to include:

  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • A photo taken from further back
  • A coin or ruler next to the damage for scale

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Common questions in Turnford

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.

Is repairing better than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Do you need to take the bath out?

No. We resurface it in place, so nothing else is disturbed.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.