Norfolk · England
Bath re-enamelling & resurfacing in Twyford, Norfolk
Bath re-enamelling across Twyford and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
About Twyford
Twyford is about 7 miles north of Dereham, in Norfolk. Clients in Twyford get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Twyford is one of 797 places in Norfolk where we work.
Every address in NR20 is within our area. Nearby, we also work in Bintree (1 mile south-east), Guist (1 mile north-west), Billingford (2 miles south), North Elmham (3 miles south-west) and Worthing (3 miles south). We also work in nearby towns such as Dereham (7 miles south), Wymondham (15 miles south), Sheringham (15 miles north-east), Hethersett (15 miles south-east), Swaffham (15 miles south-west) and Taverham (11 miles south-east).
Near you in Twyford
Typical jobs here are in homes near Foulsham Primary School Academy and Church of St Nicholas. Further afield, we also cover the area around Morley Castle (4.1 miles south). For a walk, there’s Foxley Wood.
Bath re-enamelling at your home in Twyford
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can usually put it right.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Twyford (NR20)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Landlords, letting agents and housing providers in Twyford use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Signs you need bath re-enamelling in Twyford
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted any of these:
- An old resurfacing that is failing
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- Stains that won’t shift
What your quote should include
- How soon you can use it again
- How the colour is matched
- If travel is included in the price
- What protection goes down before work starts
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- Access to the area
- Any earlier repairs that need removing first
- Doing more than one item at once
- How much damage there is
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Getting a price from pictures
You can generally get a fixed quote without us visiting. To make it quick:
- A picture taken from further back
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
For a price in Twyford, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repairing versus replacing in Twyford
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Everything repaired in place
- Colour mixed on the day to match
- Work done at your home or business
- Typically one visit, start to finish
See our full price list and guide to resurfacing and replacement costs.
Also near Twyford
What else we do in Twyford
Questions from Twyford
Which areas do you work in?
The entire UK, including all of Norfolk. Just include your postcode and we’ll confirm dates.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you come to Twyford?
Yes. We work across the UK and travel to Twyford and the rest of Norfolk. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to most of the day, tidy-up included.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
