Northamptonshire · England
Bath Re-enamelling for Warmonds Hill homes
We travel to Warmonds Hill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that is seen better days
Bath re-enamelling at your home in Warmonds Hill
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. We’re often asked to fix staining under the taps and around the waste and worn patches where water runs and sits, in cast iron baths, Victorian roll-tops and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Warmonds Hill (NN10, PE8)
- Area hub
- Northamptonshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Warmonds Hill questions
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Are there extra charges for Warmonds Hill?
We don’t add a call-out fee. Your fixed price includes everything.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Nearby places to Warmonds Hill
Other services in Warmonds Hill
Do you need bath re-enamelling in Warmonds Hill?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Most people contact us when they notice one of these:
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
- A coating lifting around the plughole
- Worn patches where water runs and sits
What to look for in a quote
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- What happens if the damage is worse than the photos show
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The colour and finish to match
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material
We charge the same wherever you are, with no extra for Warmonds Hill. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
Before you send pictures, these tips help us give you a firm price:
- Any details about the material
- Something in shot to show the size
- Details of any past repairs
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Have a window or extractor fan available
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
Landlords, agents and businesses in Warmonds Hill
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Our work in Warmonds Hill
Warmonds Hill is about 1 mile north of Rushden, in Northamptonshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 364 places in Northamptonshire. Our nearest city page is Birmingham, about 56 miles away.
Every address in NN10 and PE8 is covered, from the main roads to the quietest streets. Local streets include Nene Road, Beech Road and Wharf Road, and we cover them all. Close by, we cover Higham Ferrers (1 mile north-east), Caldecott (2 miles east), Chelveston (2 miles east), Stanwick (3 miles north-east) and Little Addington (3 miles north). We also work in nearby towns such as Northampton (13 miles west), Corby (13 miles north), Kettering (8 miles north-west), Wellingborough (4 miles west), Desborough (13 miles north-west) and Raunds (4 miles north-east).
What’s near Warmonds Hill
Around Warmonds Hill, we work in homes near Higham Ferrers Nursery and Infant School, The Griffin Public House and East Northamptonshire College, among other places. Other local landmarks include Chantry Chapel Of All Souls (under half a mile north-east) and Rushden Hall (1.3 miles south). The closest station to Warmonds Hill is Wellingborough station, about 3.3 miles west. Further afield, we also cover the area around Rushden Lakes (1.1 miles west) and Podington Castle (3.5 miles south). For a walk, there’s Swanspool Lake and Higham Ferrers Pits.
Repair or replace in Warmonds Hill?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why book with us
- Typically one visit, start to finish
- CHAS and Constructionline accredited
- No need to remove anything
- Free fixed quotes from pictures
Take a look at our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
