Oldham · England
Bath re-enamelling & resurfacing in Waterhead, Oldham
Local bath re-enamelling for Waterhead: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How we handle bath re-enamelling in Waterhead
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are worn patches where water runs and sits and chips and rust in more than one place.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Waterhead (OL4, OL1, OL2)
- Area hub
- Oldham
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Looking after it afterwards
So the finish stays in good condition:
- Clean with a soft cloth and mild detergent
- Do not leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Waterhead
Other services in Waterhead
Common questions in Waterhead
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Do you work in Waterhead?
Yes, we do. Repair technicians travel to Waterhead from across the region, with no extra charge for travel.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Waterhead and nearby
Waterhead is about 1 mile north-east of Oldham, in Oldham. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Waterhead is one of 72 places in Oldham where we work. Our nearest city page is Manchester, about 7 miles away.
All of OL4, OL1 and OL2 is covered. Streets in the area include Cow Lane, Lees Road and Keats Road, all of which we cover. If you are just outside Waterhead, we cover Greenacres (1 mile south-east), Clarksfield (1 mile south), Watersheddings (1 mile north), Derker (1 mile west) and Crossbank (1 mile east). We also work in nearby towns such as Chadderton (3 miles west), Failsworth (4 miles south-west), Uppermill (3 miles east), High Crompton (3 miles north-west), Nordens (3 miles west) and Chadderton Park (3 miles west). Being one of Oldham’s larger places, Waterhead is somewhere we visit often.
Around Waterhead
Locally, our jobs take us to homes close to Counthill School, St Barnabas and Oldham Pupil Referral Unit. Also close by are Shepherds Boy pub (0.5 miles east) and Littlemoor Primary School (within half a mile north). The closest station to Waterhead is Mossley (Manchester) station, about 2.9 miles south-east of the centre. A little further out are Ashton Hurst (2.7 miles south) and Royal Oldham Hospital (1.6 miles west). Green spaces nearby include Tandle Hill and Eastwood Nature Reserve.
Do you need bath re-enamelling in Waterhead?
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is usually as strong as ever.
Common reasons people in Waterhead contact us are:
- Chips and rust in more than one place
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
Questions to ask before you book
- What happens if they find more damage
- A fixed price, and whether VAT is included
- When it can be used again
- What protection goes down before work starts
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- Holes rusted through the metal
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Waterhead
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Same prices wherever you are
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- How many areas need work
- Whether old repairs or coatings need taking off
- Doing more than one item at once
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any details about the material
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
