Devon · England
Bath Re-enamelling in Whimble
We travel to Whimble for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off

How we handle bath re-enamelling in Whimble
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for wear marks under the taps and chips and rust in more than one place, on basins & shower trays, Victorian roll-tops and acrylic baths.
Big or small, it’s backed by a one-year guarantee in Whimble and across Devon.

- Location
- Whimble (EX22)
- County
- Devon
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Places near Whimble
Other services in Whimble
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Do not use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Whimble
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work in Whimble?
We do. Repair technicians travel to Whimble from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
When a repair isn’t the answer
Some jobs are not right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Landlords, agents and businesses in Whimble
We work for landlords, letting agents and housing providers in Whimble as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The colour and finish to match
- What the surface is made of
- What kind of damage it is
- How easy the damage is to reach
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
You can usually get a fixed price without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we are called out for in Whimble
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Customers typically contact us about:
- Lots of chips and rust spots
- Wear marks under the taps
- An old resurfacing that is failing
- Brown or grey marks that do not clean off
What your quote should include
- How to look after the finish
- Whether a trained technician does the job
- How your room will be protected
- If travel is included in the price
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Whimble
- Colour mixed on the day to match
- Most jobs done in one visit
- We leave the room as we found it
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
About Whimble
Whimble is about 16 miles south of Bideford, in Devon. We visit clients in Whimble, so nothing has to leave your home. We cover 586 places across Devon, from the larger towns to small villages.
All of EX22 is within our area. Jobs here include addresses on Staddon Road and Winterland Lane and the roads around them. Other places close to Whimble include Holsworthy (1 mile north-west), Torridge (1 mile north-west), Derriton (1 mile west), Pyworthy (2 miles west) and Chilsworthy (2 miles north-west). Further out, we also cover Great Torrington (13 miles north-east), Hatherleigh (12 miles east), Lifton (11 miles south) and Hartland (14 miles north-west).
Local landmarks in Whimble
Locally, our jobs take us to homes close to Old Market Inn, Holsworthy Church of England Primary School and Holsworthy Community College and the streets around them. Further afield, we also cover the area around Holsworthy Museum (0.8 miles north-west). For a walk, there is Dunsdon National Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.

