Norfolk · England
Bath re-enamelling & resurfacing in Witton, Norfolk
Bath re-enamelling for Witton, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
How we handle bath re-enamelling in Witton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are staining under the taps and around the waste and a peeling or bubbling previous coating.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Witton (NR28)
- County
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Witton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
Before you book anyone
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
- What happens if they find more damage
- If travel is included in the price
Witton: your questions answered
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I get a price for bath re-enamelling in Witton?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your NR28 postcode.
What happens after I send pictures?
We come back with a fixed price, typically with dates to choose from. You are under no obligation.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Repair or replace in Witton?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Honest advice, even when it means no job
- One-year guarantee on every repair
- A fixed quote before you book
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About Witton
Witton is about 3 miles east of North Walsham, in Norfolk. From the centre of Witton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Witton is one of 797 towns and villages in Norfolk we cover.
We cover every part of the NR28 postcode area. You will find streets such as Stonebridge Road and Hoolehouse Road, and we cover them all. Neighbouring places we cover include Ridlington (1 mile south-east), Ridlington Street (1 mile south-east), Crostwight (1 mile south), Pollard Street (1 mile north) and Edingthorpe (1 mile north-west). Larger places within reach include Norwich (15 miles south-west), Sprowston (13 miles south-west), Thorpe St Andrew (14 miles south), North Walsham (3 miles west), Sheringham (13 miles north-west) and Taverham (15 miles south-west).
Local landmarks in Witton
Locally, our jobs take us to homes close to East Ruston Village Green and Church of St Margaret. The nearest railway station is North Walsham station, about 3.6 miles west of the centre. Nearby you’ll also find Norfolks Golden Fleece Heritage Museum (2.7 miles south-west) and Dilham Castle (3.1 miles south).
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Let us know about parking or access
- Ensure the area is dry
- Tell us about any previous repairs or coatings
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
When a repair is not the answer
A repair is not right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- The material and finish
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Email us photos of the damage and one of the entire item, with your NR28 postcode, and we’ll reply with a fixed quote.
Places near Witton
Other services in Witton
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Witton use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
