Devon · England

Bath Re-enamelling for Yarnacott homes

Bath re-enamelling in Yarnacott without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Several chips and rust patches
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Yarnacott

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit
  • Have somewhere for us to park nearby if possible

Getting a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Advice

About our bath re-enamelling in Yarnacott

Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. Typical jobs include a coating lifting around the plughole and lots of chips and rust spots, on pressed steel baths, Victorian roll-tops and basins & shower trays.

Your repair is guaranteed for a year, as with every job we do.

Location
Yarnacott (EX32)
Region
Devon
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Signs you need bath re-enamelling in Yarnacott

Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is normally perfectly sound.

Most people contact us after spotting something like this:

  • A dull, rough surface that won’t come clean
  • An old resurfacing that’s failing
  • Lots of chips and rust spots
  • An outdated colour you’d like to change

Questions to ask before booking

  • Is the price fixed, and does it include VAT?
  • How long it needs to cure
  • If travel is included in the price
  • What prep work is covered

Our hiring checklist

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • A quick wipe after use keeps limescale away
  • Wash away dyes and oils after use
  • Store bottles off the bath
  • Clean with a soft cloth and mild detergent

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Landlords, agents and businesses in Yarnacott

Landlords, letting agents and housing providers in Yarnacott use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

About Yarnacott

Yarnacott is about 4 miles east of Barnstaple, in Devon. Customers in Yarnacott get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Yarnacott is one of 586 places in Devon where we work.

Jobs in EX32 work the same way as everywhere else we cover. Nearby, we also work in Swimbridge (1 mile south), Harford (1 mile north-west), Gunn (2 miles north), West Buckland (2 miles east) and Filleigh (3 miles south-east). Within a short drive, we also cover Barnstaple (4 miles west), Bideford (11 miles west), Ilfracombe (12 miles north-west), Braunton (9 miles west), Newport (4 miles west) and South Molton (6 miles south-east).

Local landmarks in Yarnacott

In Yarnacott, that means homes near Church of St James, Jack Russell pub and Swimbridge Church of England Primary School and the streets around them. For rail, the closest station is Chapleton station, about 3.9 miles south-west. Other landmarks nearby include Hawley Hospital (3.6 miles north-west) and Bratton Fleming Mound (4.7 miles north).

Map of Yarnacott © OpenStreetMap contributors

FAQs for Yarnacott

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

What bath re-enamelling costs

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • The material
  • Any earlier repairs that need removing first
  • The size and number of damaged areas
  • Where the damage is and how we get to it

Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed price

Almost every job we do is priced from pictures. This is what we need:

  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Natural light rather than flash
  • A close-up of the damage, in focus

Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Yarnacott, and we’ll come back with a fixed quote.

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, typically one day. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • Honest advice, even when it means no job
  • We leave the room as we found it
  • Colour mixed on the day to match
  • One price list for the entire UK

Take a look at our full price list or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.