Bridgend · Wales
Bath Re-enamelling for Ynysawdre homes
Problem with your bath in Ynysawdre? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Ynysawdre
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We are often asked to fix a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, in cast iron baths, Victorian roll-tops and acrylic baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Ynysawdre (CF32)
- Area hub
- Bridgend
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Ynysawdre. The price comes down to:
- How easy the damage is to reach
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How much damage there is
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Any details about the material
- A close-up of the damage, in focus
- A photo taken from further back
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Ynysawdre and the surrounding area
Ynysawdre is about 3 miles north of Bridgend, in Bridgend. Across the CF32 area, we carry out the work at your property. Ynysawdre is one of 91 towns and villages in Bridgend we cover.
Our visits in CF32 are booked in the same way as anywhere else. We regularly work on streets such as Park Road, Bryn Road and Pandy Road and the roads around them. Ynysawdre is on the A4065, which makes it straightforward to reach. If you’re just outside Ynysawdre, we cover Tondu (1 mile west), Sarn (1 mile south-east), Brynmenyn (1 mile north-east), Aberkenfig (1 mile south-west) and Bryn-coch (1 mile south-east). Within a short drive, we also cover Bridgend (3 miles south), Maesteg (5 miles north-west), Porthcawl (7 miles south-west), Newcastle Higher (3 miles south), Pencoed (4 miles east) and Bryntirion (3 miles south). Being one of Bridgend’s larger places, Ynysawdre sees plenty of our work.
What’s near Ynysawdre
Locally, our jobs take us to homes close to Coleg Cymunedol Y Dderwen, Llynfi Arms and Bryngarw Country Park, among other places. Nearby too are Brynmenyn Primary School (within half a mile north-east), Ynysawdre Comprehensive School (under half a mile east) and Church of St Ffraid aka St Bride (0.5 miles south). There is a railway station in Ynysawdre itself: Tondu station. Well-known places in the area include Glanrhyd Hospital (1.4 miles south) and Designer Outlet Bridgend (1.1 miles south-east). Green spaces nearby include Tycribwr Hill and Cornelly Quarry Lake 2.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- Normally one visit, start to finish
- Every repair guaranteed for a year
- Colour-matched on site
- One price list for the whole UK
Take a look at our full price list and bath cost comparison.
Places near Ynysawdre
Other services in Ynysawdre
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Open a window if you can
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Never use suction bath mats
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Landlord and trade work in Ynysawdre
For anyone letting property in or around Ynysawdre, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Landlords, letting agents and housing providers in Ynysawdre use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Do you need bath re-enamelling in Ynysawdre?
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Look out for these signs:
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Thin, worn enamel in places
- A coloured bath you want in white
What your quote should include
- A fixed price, and whether VAT is included
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
Ynysawdre questions
Do you cover the entire of Bridgend?
Across the UK, and that includes Ynysawdre. Prices don’t change with location.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your CF32 postcode.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Bridgend.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
