Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Ynysmaerdy, Rhondda Cynon Taff
Damaged bath in Ynysmaerdy? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Ynysmaerdy
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We’re often asked to fix a bath that stays dull however much you clean it and worn patches where water runs and sits, on Victorian roll-tops, pressed steel baths and basins & shower trays.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Ynysmaerdy (CF72)
- Area hub
- Rhondda Cynon Taff
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- The material
- Where the damage is and how we get to it
- The size and number of damaged areas
- Unusual colours or finishes
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- A close-up of the damage, in focus
- One picture of the whole bath
- Natural light rather than flash
- Any details about the material
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say right away if a repair is the right fix.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Also near Ynysmaerdy
Also in Ynysmaerdy
Questions from Ynysmaerdy
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you cover Ynysmaerdy?
Yes. We work across the UK and come to Ynysmaerdy. Send photos and we’ll quote, or call 0345 017 0787.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Ynysmaerdy and nearby
Ynysmaerdy is about 4 miles south of Porth, in Rhondda Cynon Taff. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Ynysmaerdy is one of 133 places in Rhondda Cynon Taff where we work.
Our technicians cover all of the CF72 postcode area and the streets around it. From Ely Valley Road, Ansari Court and Ynysmaerdy Terrace or a nearby road, we can come to you. If you’re just outside Ynysmaerdy, we cover Talbot Green (1 mile south-east), Llantrisant (1 mile south-east), Cross Inn (2 miles south-east), Tyla Garw (2 miles south) and Beddau (2 miles east). Within a short drive, we also cover Aberdare (12 miles north), Pontypridd (4 miles north-east), Mountain Ash (9 miles north), Tonypandy (5 miles north-west), Rhondda (8 miles north-west) and Porth (4 miles north).
Around Ynysmaerdy
In Ynysmaerdy, that means homes near Y Pant School, Llantrisant Primary and Saints Bar (Three Saints Hotel), among other places. You’ll also find Church Of St Illtyd (1 mile south-east) and Y Pant Comprehensive School (1.4 miles south). For rail, the closest station is Pontyclun station, roughly 1.8 miles south. A little further out are Royal Mint Museum (under half a mile north-east) and Royal Glamorgan Hospital (under half a mile south-east). Not far away are Y Graig and Nant Dyfrgi Pool.
When we’d advise against a repair
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
What we are called out for in Ynysmaerdy
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
Comparing quotes
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
