Cheshire East · England
Bath Repair for Ackers Crossing homes
We travel to Ackers Crossing for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- An old repair that has yellowed or come loose
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Bath repair in Ackers Crossing, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with hairline or through cracks in acrylic and deep scratches in acrylic, we can normally put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Ackers Crossing (CW12)
- Region
- Cheshire East
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath repair in Ackers Crossing
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- Rust by the waste and overflow
- Chips under the taps
- Scuffs and scratches in the surface
- Holes from dropped items
Comparing quotes
- What preparation is included
- Who will actually do the work
- How the room is protected while they work
- What aftercare is recommended
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
How we price bath repair
Repairs from £95. We price every job individually. The main factors are:
- How many areas need work
- How hard the colour is to match
- How many items we do on one visit
- How easy the damage is to reach
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone photos are fine. Ensure they show:
- The material, if you know it
- One picture of the entire bath
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For anyone letting property in or around Ackers Crossing, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Also near Ackers Crossing
Also in Ackers Crossing
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take two to three hours for most chips, and we’ll keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let us know which floor the room is on
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Getting a price
Email us photos of the damage and one of the whole item, and tell us you are in Ackers Crossing, and we will come back with a fixed quote.
Advice
FAQs for Ackers Crossing
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first, so let us know about it.
What happens next?
We come back with a fixed price, plus dates. You are under no obligation.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Our work in Ackers Crossing
Ackers Crossing is about 3 miles west of Biddulph, in Cheshire East. Our repair technicians come to customers in Ackers Crossing, so there’s no workshop to go to. Ackers Crossing is one of 254 places in Cheshire East we cover. Our nearest city page is Manchester, about 24 miles away.
Our technicians cover all of the CW12 postcode area. We also travel to Newbold Astbury (1 mile north-east), The Bank (1 mile south), Mow Cop (1 mile south-east), Brownlow Heath (1 mile north-west) and Astbury (1 mile north). Within a short drive, we also cover Crewe (9 miles west), Macclesfield (10 miles north-east), Congleton (3 miles north), Wilmslow (14 miles north), Nantwich (13 miles west) and Knutsford (13 miles north-west).
Around Ackers Crossing
Locally, our jobs take us to homes close to Kidsgrove High School and the streets around them. The closest station to Ackers Crossing is Congleton station, roughly 2.6 miles north-east of the centre. A little further out are Mow Cop Chapel Museum (1.4 miles south-east) and Haywood Hospital (5.2 miles south). Green spaces nearby include Astbury Mere and The Cloud.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Make sure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
