Wrexham · Wales

Bath chip & crack repair in Acton, Wrexham

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Acton and across Wrexham. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Acton

What happens on the day

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can normally use the bath the next day.

Preparing for the visit

  • Clear the area around the damage
  • Have a window or extractor fan available
  • Tell us about parking, stairs or access

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a free quote

Read more

About our bath repair in Acton

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. If you are dealing with a chip where the taps sit and chips along the edge of the bath, we can normally put it right.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Acton (LL12, LL13, LL11)
Area hub
Wrexham
Warranty
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

FAQs for Acton

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Will the price change on the day?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Do you work in Acton?

Yes. We cover the whole UK and travel to Acton and the rest of Wrexham. Send us pictures for a fixed quote, or call 0345 017 0787.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Repairing versus replacing in Acton

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Acton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • Every repair guaranteed for a year
  • Colour mixed on the day to match
  • Work done at your home or business
  • Everything repaired in place

Read our full price list and bath cost comparison.

Acton and the surrounding area

Acton is about 1 mile north of Wrexham, in Wrexham. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 115 towns and villages across Wrexham. You can also see our page for Liverpool, about 24 miles away.

Postcode districts we cover here: LL12, LL13 and LL11. We regularly work on streets such as Dean Road, Dee Avenue and Borras Road. With the A5156 close by, Acton is simple for us to get to. If you’re just outside Acton, we cover Borras (1 mile north-east), Little Acton (1 mile north), Rhosnesni (1 mile south-east), Garden Village (1 mile west) and Wrexham (1 mile south). Larger places within reach include Rhosllannerchrugog (5 miles south-west), Pentredŵr (5 miles south-west), Pant (5 miles south-west), Coedpoeth (4 miles west), Moss (3 miles north-west) and Johnstown (4 miles south-west). Being one of Wrexham’s larger places, Acton is somewhere we visit frequently.

Landmarks near Acton

In Acton, that means homes near Grove Park School, Bellevue Park and Acton Primary, among other places. You’ll also find Rhosnesni High School (0.5 miles south-east), Cunliffe Arms (within half a mile north) and St Margaret's Church (under half a mile west). The closest station to Acton is Wrexham General station, about 1.1 miles south-west. Other landmarks nearby include Wrexham Maelor Hospital (1.6 miles south-west) and Football Museum of Wales and Wrexham Museum (1.2 miles south-west). For a walk, there’s Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).

Map of Acton © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. You won’t pay by the hour. The price depends on:

  • Whether we combine several jobs
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • The material and finish

Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Where you are, by postcode
  • A close-up of the damage, in focus

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

What we’re called out for in Acton

Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Common reasons people in Acton contact us are:

  • Impact holes in acrylic
  • A failed DIY repair that is discoloured or lifting
  • Damage beneath the taps
  • Scuffs and scratches in the surface

What your quote should include

  • If travel is included in the price
  • How the room is protected while they work
  • Who turns up on the day
  • How changes to the job are handled

Our hiring checklist

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Materials and what they mean for the repair

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Landlords, agents and businesses in Acton

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Aftercare tips

It’s all simple stuff:

  • Rinse it down after each bath
  • Have new chips seen to early
  • Cover the bath during DIY or decorating
  • Fix dripping taps early to stop staining and limescale

Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.